New member hello and some questions!

Talk about your truck here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

got new brake hoses and wheel cyl's installed, brake shoes and drums cleaned up and reinstalled. Onto the master cyl and fuel system. sucks workin in this muggy weather were having :shock:
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

new fuel lines run
added secondary fuel filter
cleaned primary filter
rebuilt fuel pump
new master cyl
new wheel cylinders
new rubber brake hoses
1 new battery
cleaned up some wiring
removed some decals
new exhaust
oil/filter change
all new diff oil and trans oil
filler neck hose replaced
oil pan dropped cleaned sludge and new gaskets
lubed distributer
changed air filter oil
adjusted door hinges

probably forgetting some stuff


still need to check fuel gauge, tail lamps/brake lights, horn, and speedometer. reline the parking brake, may need a water pump rebuild sounds noisy. going to try to register once the electrical stuff is out of the way. been a busy 2 weeks!! wife is getting :evil:!!
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: New member hello and some questions!

Post by Cal_Gary »

Hey Tuko,
Don't tick off the Boss-that's the fastest way to grind down to a halt! That's an impressive list of work for such a short time-I've not had any available time to work on mine, just pulling it in and out of the garage when it's time to display the flag....
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
WarrenD
SSGT
SSGT
Posts: 473
Joined: Mon Dec 14, 2009 10:55 am
Location: CT
Contact:

Re: New member hello and some questions!

Post by WarrenD »

Don't forget the little things, like the vents on the transmission, T-case and axles. A clogged vent will allow pressure to build as the lube heats up and it will relieve itself by blowing out seals.
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

will add that to the list!
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
Sal
SFC
SFC
Posts: 518
Joined: Sat Jun 21, 2008 4:22 pm
Location: N.Y.

Re: New member hello and some questions!

Post by Sal »

Warren. Where's the vent on the transmission ? I got the ones on the axles, transfer case and steering box. But I didn't see any on the tranny ! :?

Sal
:mrgreen:
1954 M37 WO/W
1969 M101A1
1967 M416
WarrenD
SSGT
SSGT
Posts: 473
Joined: Mon Dec 14, 2009 10:55 am
Location: CT
Contact:

Re: New member hello and some questions!

Post by WarrenD »

You could be right, Sal. It's been more than a few days since I replaced all my driveline vents and my memory doesn't go much farther back than today's breakfast!! :oops:
User avatar
Larry S
PVT
PVT
Posts: 27
Joined: Tue Oct 23, 2007 2:16 am
Location: Ortonville,Mi

Re: New member hello and some questions!

Post by Larry S »

Early models had the ignition filter ( to prevent radio interference ) on the firewall. It was moved inside the distributor on later models.
Larry S
1953 m37 cdn
1953 m43
1973 m342 a2(duece dump)
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

mine must have been modified. sits there but not hooked up. She got a new front leaf spring pack today, old one was sagging. waiting on parking brake band. should be here monday from MWM.
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

I'm sure many of the members on the site can look at this pic and have it bring back som memories of your restorations!

Image
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
majorhitt
SGT
SGT
Posts: 187
Joined: Sun Aug 16, 2009 4:53 pm

Re: New member hello and some questions!

Post by majorhitt »

You are so right! In this photo I don't see the ignition filter on the fire wall, did you take it off already ?
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

yes, it was bypassed when I got it.
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
User avatar
Tuko
SSGT
SSGT
Posts: 380
Joined: Mon Jul 16, 2012 5:36 am
Location: CT

Re: New member hello and some questions!

Post by Tuko »

got the front of the truck put back together will be waiting for the spring to work on the bed, rims etc Image


Image
51 Dodge M37 W/W 4BT/NV4500

My G741 Registry Entry
T. Highway
Moderator
Moderator
Posts: 1818
Joined: Thu Jul 09, 2009 4:57 am
Location: S.E. Wisconsin, USA, Earth

Re: New member hello and some questions!

Post by T. Highway »

Looking good Tuko.

Bert
1952 M37 W/W Rebuild @ 59% complete
Engine rebuild @ 95% complete
1985 M1009, 1990 M101A2, 2008 M116A3 Pioneer tool trailer
MVPA # 24265
NRA Life Member
NRA Cert. Personal Protection Pistol Instructor
NRA Cert. RSO
Class III RSO/KCR
Post Reply