Home 
I have to install a light for my license plate. Whats the best way to get power for it without damaging wiring harness? Also are most 12v bulb interchangeable with 24v?
Thanks.
License plate light
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
License plate light
Gerry
53 M37
53 M37
Re: License plate light
Douglass or Packard connectors on truck? Most lamps are available in 6,12,24v in the same base.
The easiest way to add a wire for the plate lamp is to install a 1 to 2 wire shell on wire 21 it the splice junction above the right rear bumperette.
The easiest way to add a wire for the plate lamp is to install a 1 to 2 wire shell on wire 21 it the splice junction above the right rear bumperette.
"It may be ugly, but at least it is slow!"
Re: License plate light
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004