Part Identification Help Needed

[w30bob]

Hi Guys,

I need someone to tell me what these steel plate parts are, and if they're M37 parts. I got them in a box of supposedly M37 parts, but can't identify them. They're both identical, meaning not left and right or a mirrored pair. They've got OD paint on them and the two holes on the vertical flange have cutouts for a wide shoulder or for the head of the bolt itself. Let me know what you think.

thanks,
bob


plate2 by w30bob, on Flickr


Plate1 by w30bob, on Flickr

[RMS]

oil filter bracket bolts to head

[PoW]

The larger one is for the G-741 trucks.

The small one may be for WW2 or an industrial motor.

Dennis

[T. Highway]

Oil filter bracket.

Bert

[w30bob]

You guys are GOOOD!

thanks,
bob

[majorhitt]

I like to look and see if I could ID the part prior to looking at the replies. Had the large one not the small one.

[w30bob]

No sweat Ed.....there is no "Large" on or "Small" one....they're identical. They just look different due to my poor photographic skills. Once you guys mentioned the oil filter bracket I confirmed that's it.

thanks again,
bob

[majorhitt]

It looked like the one on it's side was a little smaller. My mistake.

[majorhitt]

OK so they are both on their side the one to the left appears to be different. Maybe new glasses would help.

[w30bob]

Ed........I've got glasses........it doesn't help.

regards,
bob

[majorhitt]

Me My glasses I can't with or without them.