Brass bushings for transfer case levers

m37jarhead · Post by **m37jarhead** » Sun Mar 14, 2010 5:58 am

I've taken apart the transfer case levers and see that the brass bushings are worn pretty thin. Anyone have a source for replacement bushings?

HingsingM37 · Post by **HingsingM37** » Sun Mar 14, 2010 9:58 am

Quickest most painless thing to do is get a Bunting or Isostatic bronze bushing from any Bearing Distributor or McMaster Carr. For this app. you can use the sintered bronze (oilite) as they are less money. I don't recall the size I used on mine.

m37jarhead · Post by **m37jarhead** » Sun Mar 14, 2010 10:02 am

OK, thanks, I'll take a run at some of the bearing supply houses around
here.