Bridge Plate question
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- PFC
- Posts: 85
- Joined: Sat Oct 27, 2007 7:25 am
- Location: Silver Springs, Florida
- Contact:
Bridge Plate question
Did all trucks have a bridge plate at one time or did it depend on where it was deployed? My M201B1 had US ARMY, HAWAII on the drivers side bed door thinking maybe it never had one. Thanks for any guidance!
Jim
Jim
1951 M37 W/W
1961 M201B1 W/W
MVPA #31454
I was Chrysler when Chrysler wasn't cool!
1961 M201B1 W/W
MVPA #31454
I was Chrysler when Chrysler wasn't cool!
-
- PFC
- Posts: 85
- Joined: Sat Oct 27, 2007 7:25 am
- Location: Silver Springs, Florida
- Contact:
If they were deployed where a tactical bridge was being used they would need one. They did (do) drills and practiced with placement of bridges ect on manuvers in the US, so the bridge plate was needed.
Also, just because a truck was in a unit in the US doesnt mean it wouldnt get shipped overseas with the unit if called up. Most units take their vehicles with them when they ship out. The armory near me is pretty much devoid of vehicles since the unit is in Iraq.
The weight stickers(or painted circles) on the doors were mostly placed on the passenger side as the MP or whoever was keeping track of the weight on the bridge was on the right side of the approaches from what I understand...
RS
Also, just because a truck was in a unit in the US doesnt mean it wouldnt get shipped overseas with the unit if called up. Most units take their vehicles with them when they ship out. The armory near me is pretty much devoid of vehicles since the unit is in Iraq.
The weight stickers(or painted circles) on the doors were mostly placed on the passenger side as the MP or whoever was keeping track of the weight on the bridge was on the right side of the approaches from what I understand...
RS
Rusty S.
- uglyranger
- PFC
- Posts: 86
- Joined: Mon Jul 21, 2008 6:02 am
- Location: Georgia
-
- PFC
- Posts: 85
- Joined: Sat Oct 27, 2007 7:25 am
- Location: Silver Springs, Florida
- Contact:
-
- SFC
- Posts: 565
- Joined: Wed Jun 11, 2008 5:53 am
Hey ugly,uglyranger wrote:Jim: Not all m37s had bridge plates. In Vietnam 1970-71 I was assigned to a transportation company that ran the roads from Qui Nhon to Khe Sahn. None of our trucks had bridge plates. I guess it would depend on where you were, and what time period.
I believe your trucks, because you were a Trans unit, your M37s ran with the convoys and the other trucks were much heavier so the smaller 3/4 would not be a problem if it did not have a bridge plate where your LineHaul trucks did! Now if it was a 3/4 that was in a Medical unit and would run the smaller roads, it would have the bridge plate. What is funny is that all the collectors put them on the jeeps and the TO said that it was to be installed on 3/4 tons and up.
-
- SFC
- Posts: 565
- Joined: Wed Jun 11, 2008 5:53 am
-
- SFC
- Posts: 565
- Joined: Wed Jun 11, 2008 5:53 am
-
- SFC
- Posts: 565
- Joined: Wed Jun 11, 2008 5:53 am
Vtdueceddriver really nice pictures. Thanks for sharing them and the yellow nose! You and Uglyranger have posted some great pictures recently that are great reference shots of trucks in the Vietnam era. I wish I lived near you I would go to the show. Prehaps you could share some of your presetation here on the forum for those of us who can't make it to see it in person.
1952 M37
M101 trailer
1942 Chevy G506
M101 trailer
1942 Chevy G506