Cargo Cover - Supports

dstrausb1 · Post by **dstrausb1** » Wed Oct 15, 2008 4:55 pm

Hi. I'm a newbee to the list. Been reading for a while, this is my first attempt at a post.
I've decided to put a cargo cover on my M37 and am looking for some opinions with respect to the supports. My truck has the troop seats but no bows. I've noticed that it is possible to buy a complete bow kit or just the corner angles. Has anyone out there just bought the angles and made all of the wood parts? Are there many other bits and pieces that you have to recognize and come up with if you don't buy the complete kit? Is there a set of specificatons available that lists all of the wood piece dimensions and a list of fasteners and their dimensions?
Any views or guidance would be much appreciated.
Thanks.

Drew M. · Post by **Drew M.** » Thu Oct 16, 2008 4:31 am

Garbee's website has the wood info.

Fastner specs - probably in the manuals.

Carter · Post by **Carter** » Thu Oct 16, 2008 4:32 am

Cabell Garbee has this posted on his website and are the directions I used when I cut the wood for the cargo bed.

http://www.garbee.net/~cabell/bedwood.htm

Carter · Post by **Carter** » Thu Oct 16, 2008 4:34 am

Drew M. wrote:Garbee's website has the wood info.

Fastner specs - probably in the manuals.

Andy, you are way ahead of me

MSeriesRebuild · Post by **MSeriesRebuild** » Thu Oct 16, 2008 1:29 pm

dstrausb1 wrote:Hi. I'm a newbee to the list. Been reading for a while, this is my first attempt at a post.
I've decided to put a cargo cover on my M37 and am looking for some opinions with respect to the supports. My truck has the troop seats but no bows. I've noticed that it is possible to buy a complete bow kit or just the corner angles. Has anyone out there just bought the angles and made all of the wood parts? Are there many other bits and pieces that you have to recognize and come up with if you don't buy the complete kit? Is there a set of specificatons available that lists all of the wood piece dimensions and a list of fasteners and their dimensions?
Any views or guidance would be much appreciated.
Thanks.

We have some bow corners if you want to furnish your own wood.

dstrausb1 · Post by **dstrausb1** » Fri Oct 17, 2008 4:49 pm

Thanks for the feed back guys. This forum is definately a helpful, encouraging place. The truck wouldn't be near as much fun without it.

Cargo Cover - Supports

Cargo Cover - Supports

Re: Cargo Cover - Supports