Pinion Drive Shaft Seal

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
Sal
SFC
SFC
Posts: 518
Joined: Sat Jun 21, 2008 4:22 pm
Location: N.Y.

Re: Pinion Drive Shaft Seal

Post by Sal »

The sleeve numbers are listed also...
1954 M37 WO/W
1969 M101A1
1967 M416
Top
User avatar
Rdinatal
CPL
CPL
Posts: 151
Joined: Mon May 01, 2023 12:46 pm
Location: Lake Normanopolis, NC

Re: Pinion Drive Shaft Seal

Post by Rdinatal »

Sal wrote: ↑Sun Dec 29, 2024 5:22 am The sleeve numbers are listed also...
Thank you.
I had to look a 3rd time. You're correct there are some listed but nothing for the 1.875 I.D. x 4.014 O.D. x 1.000 sized pinion flange seal.

Update: (confirmed)
F&R Axle Pinion Flange Speedi-Sleeve #99187
(1.872in Shaft Diameter)
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch, bikini top, tool box liners, 24v & 12v fused circuits.

Planned: Seatbelts :roll:
Top
User avatar
Rdinatal
CPL
CPL
Posts: 151
Joined: Mon May 01, 2023 12:46 pm
Location: Lake Normanopolis, NC

Re: Pinion Drive Shaft Seal

Post by Rdinatal »

This Mother is just wearing me out. Any hints / tricks on getting the old one out??
I'm almost thinking this is going come out in small pieces!

BTW: The old seal was leather and the flange is worn/pitted. Definitely needs a sleeve.
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch, bikini top, tool box liners, 24v & 12v fused circuits.

Planned: Seatbelts :roll:
Top
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Pinion Drive Shaft Seal

Post by Cal_Gary »

Here's how I get 'em out:
viewtopic.php?f=3&t=4305&hilit=penion&start=30

Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Top
User avatar
Rdinatal
CPL
CPL
Posts: 151
Joined: Mon May 01, 2023 12:46 pm
Location: Lake Normanopolis, NC

Re: Pinion Drive Shaft Seal

Post by Rdinatal »

Cal_Gary wrote: ↑Sat Jan 18, 2025 12:16 am Here's how I get 'em out:
viewtopic.php?f=3&t=4305&hilit=penion&start=30

Gary
Thank you.
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch, bikini top, tool box liners, 24v & 12v fused circuits.

Planned: Seatbelts :roll:
Top
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Pinion Drive Shaft Seal

Post by Cal_Gary »

You bet-good luck!
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Top
Post Reply

Return to “Technical group”