Brake Pedal Removal

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
User avatar
Rdinatal
CPL
CPL
Posts: 151
Joined: Mon May 01, 2023 12:46 pm
Location: Lake Normanopolis, NC

Brake Pedal Removal

Post by Rdinatal »

I need to have the brake pedal modified for the type of power brakes being installed. A search on the .net on how to remove it turned up zero. Even a search here, nada...

Looking at the IPB shows the pedal shaft and bracket. How is the shaft held in the bracket? I don't see a retaining clip or bolt.
Do I need to take the bracket off the frame and then slide the shaft out of the bracket towards the frame?
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch, bikini top, tool box liners, 24v & 12v fused circuits.

Planned: Seatbelts :roll:
Top
just me
1SG
1SG
Posts: 1241
Joined: Fri Nov 28, 2014 4:25 pm

Re: Brake Pedal Removal

Post by just me »

Look in the body and chassis manual. Procedure is there.
"It may be ugly, but at least it is slow!"
Top
User avatar
Rdinatal
CPL
CPL
Posts: 151
Joined: Mon May 01, 2023 12:46 pm
Location: Lake Normanopolis, NC

Re: Brake Pedal Removal

Post by Rdinatal »

just me wrote: ↑Tue Aug 01, 2023 12:56 pm Look in the body and chassis manual. Procedure is there.
Thanks. The clutch pedal shares the same bracket and shaft. I found where the retaining collar clamp is.
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch, bikini top, tool box liners, 24v & 12v fused circuits.

Planned: Seatbelts :roll:
Top
Post Reply

Return to “Technical group”