slave cable plug Q

TOM R · Post by **TOM R** » Thu Aug 07, 2008 1:11 pm

anyone know how to remove the slave cable plug from its metal housing ?

Franz© · Post by **Franz©** » Thu Aug 07, 2008 11:02 pm

It doesn't come out in any salvagable condition.
The rubber surrounding the contacts was vulcanized in place.

TOM R · Post by **TOM R** » Fri Aug 08, 2008 5:42 am

if i cut the broken case off could i slide it into the new case?

k8icu · Post by **k8icu** » Fri Aug 08, 2008 9:48 am

There not that expensive. Why not just save the headache and get a new one?

Post by **Cal_Gary** » Fri Aug 08, 2008 11:53 am

Agreed-you can score one for $25 on E-Bay regularly....
Gary

TOM R · Post by **TOM R** » Fri Aug 08, 2008 1:07 pm

well dad and i got alot of project vehicles near completeion so a few $ makes a big difference at this point, I bought a used mount woth cover from a guy and it has no guts so we figured it comes apart somehow

thanks for the info

TOM R · Post by **TOM R** » Sat Aug 09, 2008 5:50 am

well cut off the housing , sprayed on some lube and used the shop press with wood blocks to press it in worked fine, after disasembly it looks like you could set it in the press and press it out from the front, my only question now is the 2 pins supposed to be on the same side as the key notch for the slave plug or 180* away?

AmarilloCorey · Post by **AmarilloCorey** » Sat Aug 09, 2008 9:38 am

TOM R wrote:well cut off the housing , sprayed on some lube and used the shop press with wood blocks to press it in worked fine, after disasembly it looks like you could set it in the press and press it out from the front, my only question now is the 2 pins supposed to be on the same side as the key notch for the slave plug or 180* away?

The 2 pins are on the opposite side of the key notch.

[img][img]http://i36.tinypic.com/o8utn5.jpg[/img][/img]

TOM R · Post by **TOM R** » Sat Aug 09, 2008 6:47 pm

thats what we figured thanks for the help