Original Wood used for the Troop Seats
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- PFC
- Posts: 99
- Joined: Wed Sep 30, 2015 5:24 pm
Original Wood used for the Troop Seats
Hi folks,
I tried several searches on this subject with no luck.
What was the original Wood used for the Troop Seats ?
I've seen folks using Mahogany and White Oak and since they are normally painted, I'm guessing it's not a big deal ?
However for the books, was it Pine ???
Thanks
I tried several searches on this subject with no luck.
What was the original Wood used for the Troop Seats ?
I've seen folks using Mahogany and White Oak and since they are normally painted, I'm guessing it's not a big deal ?
However for the books, was it Pine ???
Thanks
Re: Original Wood used for the Troop Seats
Likely not a softwood like pine. I used a hardwood (oak), but ash or similar would work, too. I've not had good luck with maple, as it tends to warp.
“When a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, IT IS THEIR RIGHT, IT IS THEIR DUTY, TO THROW OFF SUCH GOVERNMENT...” -Declaration of Independence, 1776
Re: Original Wood used for the Troop Seats
I used ash, inexpensive, and plenty strong. I rounded off the edges a bit, to avoid cuts. It was easy when I use the old boards for a pattern to drill the holes. New carriage nuts, stainless nuts. Painted mine black, hc
Re: Original Wood used for the Troop Seats
I believe I read over on Steel Soldier a while back that oak was used. I used Red Oak on mine only because I like the look of it .
1954 M37 WO/W
1969 M101A1
1967 M416
1969 M101A1
1967 M416
Re: Original Wood used for the Troop Seats
What an immaculate truck! I have spent two days de-mudding mine from the winch out episode of earlier this week. Hc
Re: Original Wood used for the Troop Seats
I don't know what was originally used, but White Oak would be an excellent choice. It's strong and rot-resistant, even when left unfinished. It will hold up significantly longer out in the weather than Red Oak or Ash.
Last edited by John Mc on Sat Jul 25, 2020 6:11 am, edited 1 time in total.
1951 M37 "Brutus" w/Winch and 251 engine
Re: Original Wood used for the Troop Seats
It's definitely an oak. I have my original rails and am going to replace them. I cut a piece and they still, without a doubt, smell and look like oak.
Re: Original Wood used for the Troop Seats
I have an NOS box of bed bow wood in the basement and can take a look, assuming the other wood was of the same material.
More to follow,
Gary
More to follow,
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Re: Original Wood used for the Troop Seats
Hi All,
I dug into the box today-it is likely white ash, very strong but flexible.
Gary
I dug into the box today-it is likely white ash, very strong but flexible.
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Re: Original Wood used for the Troop Seats
Ash is a great choice for something that needs to be bent. However, unless it's finished with some sort of protective coating, it's not as weather resistant as some other species.
1951 M37 "Brutus" w/Winch and 251 engine
Re: Original Wood used for the Troop Seats
One of the parts manuals specs it as Red Oak. I used Ash as I couldn't get hickory.
"It may be ugly, but at least it is slow!"
Re: Original Wood used for the Troop Seats
Good to know, Justme-I'm no expert on wood but my box is certainly not red oak.
Gary
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004