WTB 24 volt two speed toggle switch

Buy and sell M37 and related stuff

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Forum rules
Your Location must be included in your advertisement or it may removed without notice.
Post Reply
MarkPick
CPL
CPL
Posts: 121
Joined: Sat Jun 09, 2012 2:36 pm
Location: Cincinnati OH

WTB 24 volt two speed toggle switch

Post by MarkPick »

Hoping someone can help me out, I am looking for a two speed 24 volt toggle switch. Same ones that came with the mutt heaters. I need two of them. One to replace my heater switch and the other to work my electric wipers.

Also,
I have the following items to offer, shipping from Cincinnati Oh. Jump seat for the bed of M37, Vacuum wiper motors, They worked but could use a good going over. One of them has a slightly bent shaft. And finally, I have a metal jerry can with the cone strainer. This is an old jerry can my dad had tucked away in his garage.

If interested or can help me out on the toggle switches please PM me.

Thanks
Mark
USAF Retired
Desert Storm
Iraqi Freedom
just me
1SG
1SG
Posts: 1224
Joined: Fri Nov 28, 2014 4:25 pm

Re: WTB 24 volt two speed toggle switch

Post by just me »

The two speed toggle is just a SPDT center off switch. Hardware stores sell them. If Saturn Surplus is still open, he has the waterproof versions. Speed is controlled by a sand-cast high current resistor that is a bit harder to come by in today's world.
"It may be ugly, but at least it is slow!"
MarkPick
CPL
CPL
Posts: 121
Joined: Sat Jun 09, 2012 2:36 pm
Location: Cincinnati OH

Re: WTB 24 volt two speed toggle switch

Post by MarkPick »

Thanks for the info JM! Right on target with Saturn.

Thanks again.
USAF Retired
Desert Storm
Iraqi Freedom
just me
1SG
1SG
Posts: 1224
Joined: Fri Nov 28, 2014 4:25 pm

Re: WTB 24 volt two speed toggle switch

Post by just me »

This is all there is to the two speed fan.
Attachments
rps20181105_193227.jpg
rps20181105_193227.jpg (55.3 KiB) Viewed 1230 times
"It may be ugly, but at least it is slow!"
User avatar
sturmtyger380
SFC
SFC
Posts: 574
Joined: Sun Oct 21, 2007 5:13 pm
Location: Up State SC

Re: WTB 24 volt two speed toggle switch

Post by sturmtyger380 »

You can go the resister route which builds up heat in the motor winding or you can be nicer to your DC motor and use a speed controller.

https://www.electronickits.com/dc-pwm-m ... max-mx033/
47 CJ2A
53 M38A1
52 M37
51 M38
67 M416
?? M101A1
MarkPick
CPL
CPL
Posts: 121
Joined: Sat Jun 09, 2012 2:36 pm
Location: Cincinnati OH

Re: WTB 24 volt two speed toggle switch

Post by MarkPick »

That is perfect! Thanks for sharing the link as well!
USAF Retired
Desert Storm
Iraqi Freedom
Post Reply