Prices for the M101 seem very high . . .

Buy and sell M37 and related stuff

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Forum rules
Your Location must be included in your advertisement or it may removed without notice.
Post Reply
Drew M.
CPL
CPL
Posts: 111
Joined: Wed Apr 02, 2008 7:49 pm
Location: Harrisburg, PA

Prices for the M101 seem very high . . .

Post by Drew M. »

The best trailer I ever saw for sale at GL - had new tires, new tarp, and a NEW BED/Tailgate - went for $580.

Usually the PA GL trailers sell for $200-280 and get listed by the local PA MV dealers for a multiple of that. The Mechanicsburg stuff sells for more than Letterkenny.

But, if you really really need a M101a1 and want to pay over $750, I got a trailer for you. [I will use the $ to buy a couple more next time from GL:)]

Also, the M101a1 should be comming up at reasonable prices at GL auctions as they are replaced by a lighter trailer that does not break the Humvee's frame and with the slow economy, MV dealers probably are not grabbing as many.
knattrass
SFC
SFC
Posts: 625
Joined: Fri Jan 04, 2008 7:27 am
Location: Deetriot, MI

Post by knattrass »

Drew - you are right, it seemed that m101 going thru both PA GSA were high in number, lot of them! For me in Detroit, too far, too much. We finally had a few come thru the MI location - 2 train wrecks and one decent one. We'll keep an eye on them for noW!
Brian Mc.
Posts: 5
Joined: Thu Jan 17, 2008 5:12 pm
Location: Pasadena,Texas

Post by Brian Mc. »

I recently picked up one from GL and was very satisfied with the condition and price even though on the high side ,it was within driving distance .
Here is a pic.
Image
Image
obxron
PVT
PVT
Posts: 49
Joined: Sat Nov 03, 2007 4:10 pm
Location: Outer Banks, North Carolina

Post by obxron »

I just picked up a M101a1 through GL for $160 but I fear it is a pretty rough rust bucket. It did have all the side racks, bows and possibly a rotted canvas too. I picked it up at a remote location, they tend to go for cheaper at those kind of places. Once I pass through the hoops and loops and pick it up I will share my findings and hopefully photos with the forum.

Ron
1954 M37
M101A1 (EUC being processed)
Drew M.
CPL
CPL
Posts: 111
Joined: Wed Apr 02, 2008 7:49 pm
Location: Harrisburg, PA

Possibly rotted canvas . . .

Post by Drew M. »

It should have a vinyl tarp. They hold up extremely well. Mine looked much worse in the photo than in person as it was covered in dust/grime.

What goes o the tarps is the cotton stitching. Go to Harbor Frieght Tools and buy their awl/thread kit (w/ HD polyester thread) for under $4 and re-do the stitching (forget trying to use the wife's puny sewing needles).
Post Reply