M37 Points & condenser

[1963M37B1]

2016 12-11a The M37.jpg (176.78 KiB) Viewed 2275 times

Back in 2007 I bought this M37 and now that I have retired I am trying to get it running. The distributor has no points or condenser in it. What does one buy at the local parts store for a 1963 M37? Isn't there a parts conversion list somewhere for plugs, points, condenser, etc? Can't seem to find it with the search feature?
Looks like I need to post a smaller picture somehow.

[1963M37B1]

Was searching in the wrong forum, found Napa Echlin CS725A for points and AL869 for condenser in the Technical forum.

[Tom P]

This is what I have on file all Standard Motor Parts (SMP)
Don't know how current the numbers are.

Points SMP# AL-4556XP GAP=.020

Condenser SMP# AL-118X

Rotor SMP# AL-150

Spark Plugs Autolite# 295

Coil, Cap, Wires from MV part suppliers only.
Tom

[MSeriesRebuild]

Auto-lite plug # 295 listed above is not the waterproof original type plug for M37, and is not compatible with mil spec waterproof cables. 295 is a civilian plug that would be used in a situation where a system is being converted to a 12-volt civilian set up, and waterproof components are not being used.

[isaac_alaska]

good chance to install a Pertronix

[DJ]

Welcome to retirement, now you will wonder how you had time to work.

[Stovebolt]

FWIW ... Ditch the points! I did the Pertronix upgrade in my M-37 and I couldn't be happier with it. Very easy to do and you don't have the hassle of the points, condenser blah blah blah.

I did it on a spur of the moment decision and my test drive was a 250-mile jaunt down the outer banks of North Carolina with zero problems (well, other than vapor lock but that wasn't an ignition issue ...)

Just sayin'

Congrats on the retirement -- hope to join you soon!