Differences in the NP200 vs NP201?

Talk about your truck here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
06boblee
SFC
SFC
Posts: 593
Joined: Tue Nov 06, 2007 6:46 pm
Location: Quinlan, Texas

Differences in the NP200 vs NP201?

Post by 06boblee »

Is the gasket and seal kit the same for both? I bought a set and it is for the 201, will it work on my 200?
'54 M37 wew
MVPA #16921
Top
Jess
SSGT
SSGT
Posts: 306
Joined: Sun Oct 21, 2007 9:41 am
Location: Vancouver Island B.C. Canada

Re: Differences in the NP200 vs NP201?

Post by Jess »

I can't answer for sure but I thought the 201 had a pto port on it. Contact DC Trucks, as he will know and does carry parts for most of our stuff.
Top
Elwood
MSGT
MSGT
Posts: 950
Joined: Mon Oct 24, 2011 9:34 am
Location: Water Winter Wonderland

Re: Differences in the NP200 vs NP201?

Post by Elwood »

The NP201 also differs from the NP200 in the use of a "knock" gear (a cushioned gear that apparently chews up its internal springs resulting in a knocking sound) and rear axle output through a direct drive instead of through the idler gear. But I think the gasket sets should interchange, except, obviously, for the PTO opening if the NP201 has it.
“When a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, IT IS THEIR RIGHT, IT IS THEIR DUTY, TO THROW OFF SUCH GOVERNMENT...” -Declaration of Independence, 1776
Top
06boblee
SFC
SFC
Posts: 593
Joined: Tue Nov 06, 2007 6:46 pm
Location: Quinlan, Texas

Re: Differences in the NP200 vs NP201?

Post by 06boblee »

I got my kit from DC trucks, and it does not have a PTO gasket. I bought this a couple of years ago and am just now needing to use it- I wrote 201 on it , maybe I was wrong.
'54 M37 wew
MVPA #16921
Top
Post Reply

Return to “General M37”