Hi guys, I'm back. Move completed to South Carolina from New Jersey. Gonna start working on M-37 again now that new shop is completed.
My question is are the output yokes on the transfer case the same size as the axle yokes ? I had previously installed a redi sleeve on a transfer case yoke. Now I have a leak on the rear axle seal. Seal is new and yoke is smooth. It's not pressure building up, it leaks all the time. Does anyone have the redi sleeve part number for the axle yoke ???
Redi Sleeve Question
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Re: Redi Sleeve Question
Diff. yoke is 99187
T-Case yokes are 99212
TGP
T-Case yokes are 99212
TGP
"47" WDX WW
"52" M37 WW
"54" Willys M38A1
"65" M35A1 WW
To Many Others
http://www.g741.org/photogallery/main.p ... temId=2019
"52" M37 WW
"54" Willys M38A1
"65" M35A1 WW
To Many Others
http://www.g741.org/photogallery/main.p ... temId=2019
Re: Redi Sleeve Question
Welcome back, Bill,
You probably hate moving as much as I do!
Gary
You probably hate moving as much as I do!
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
-
- CPL
- Posts: 165
- Joined: Thu Mar 07, 2013 7:43 am
Re: Redi Sleeve Question
Moving went well considering, cost us 10K. Moving the M-37 went well too. Had an enclosed trailer contracted. Cost $1200 to move from NJ.
Re: Redi Sleeve Question
Ouch! That would have bought a few parts... 
Gary

Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004