Transmission boot
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- Moderator
- Posts: 1818
- Joined: Thu Jul 09, 2009 4:57 am
- Location: S.E. Wisconsin, USA, Earth
Re: Transmission boot
If it has petrified, you will need to destroy it and buy a new one.
If it hasn't, you should be able to gently pry it out. You could also remove the tunnel cover and push it thru from the bottom side.
Bert
If it hasn't, you should be able to gently pry it out. You could also remove the tunnel cover and push it thru from the bottom side.
Bert
1952 M37 W/W Rebuild @ 59% complete
Engine rebuild @ 95% complete
1985 M1009, 1990 M101A2, 2008 M116A3 Pioneer tool trailer
MVPA # 24265
NRA Life Member
NRA Cert. Personal Protection Pistol Instructor
NRA Cert. RSO
Class III RSO/KCR
Engine rebuild @ 95% complete
1985 M1009, 1990 M101A2, 2008 M116A3 Pioneer tool trailer
MVPA # 24265
NRA Life Member
NRA Cert. Personal Protection Pistol Instructor
NRA Cert. RSO
Class III RSO/KCR
-
- SFC
- Posts: 549
- Joined: Fri Apr 03, 2015 1:56 pm
- Location: upper mi
Re: Transmission boot
I bumped mine when I pulled my engine and tranny
and it shattered
and it shattered

Thanks,TRAVIS
When it comes to gambling I don't play the Powerball, I play the Powerwagon
1952 M37 FARM TRUCK
230 W/THRUSH EXHAUST, DELETED HEAT RISER AND 12 VOLT IGNITION
1941 WC RATROD
w/ 5 TON MULTIFUEL TURBO DIESEL
When it comes to gambling I don't play the Powerball, I play the Powerwagon
1952 M37 FARM TRUCK
230 W/THRUSH EXHAUST, DELETED HEAT RISER AND 12 VOLT IGNITION
1941 WC RATROD
w/ 5 TON MULTIFUEL TURBO DIESEL
-
- SFC
- Posts: 557
- Joined: Tue Jul 07, 2015 10:44 pm
- Location: Fairbanks, Alaska and Nome, AK
Re: Transmission boot
these things came with a transmission boot? o.O
Isaac
Fairbanks, AK
Civilian WM300 on DC3 tires
'52 M37 on 11x16 Michelin
'52 M37 on Apple R-1 tractor tires
Photo Gallery
Fairbanks, AK
Civilian WM300 on DC3 tires
'52 M37 on 11x16 Michelin
'52 M37 on Apple R-1 tractor tires
Photo Gallery
-
- PFC
- Posts: 99
- Joined: Wed Sep 30, 2015 5:24 pm
Re: Transmission boot
I just replaced mine after a Transmission Rebuild.
I have a NP 88950 so I purchased the miniature "Top Hat" from Vintage Power Wagons.
It fits nicely since it's actually pliable.
My Floor gasket crumbled around the Tower Base.
I bought one of those too from Vintage, although I suspect that there must be after market ones out there.
I just never stopped by a Tranny shop to ask..
It sure looks good once your plate, tower and gaskets are all painted & in place.

We even fixed the Transfer Lever "weather" gasket on the floor plate using a Rubber Stair Runner from home depot.
Cut it using the pieces from what was left of the original.
Looks like new.
I have a NP 88950 so I purchased the miniature "Top Hat" from Vintage Power Wagons.
It fits nicely since it's actually pliable.
My Floor gasket crumbled around the Tower Base.
I bought one of those too from Vintage, although I suspect that there must be after market ones out there.
I just never stopped by a Tranny shop to ask..
It sure looks good once your plate, tower and gaskets are all painted & in place.

We even fixed the Transfer Lever "weather" gasket on the floor plate using a Rubber Stair Runner from home depot.
Cut it using the pieces from what was left of the original.
Looks like new.