Wanted door access panel

Buy and sell M37 and related stuff

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Forum rules
Your Location must be included in your advertisement or it may removed without notice.
Post Reply
m15256
CPL
CPL
Posts: 131
Joined: Fri Dec 26, 2008 6:00 pm
Location: Vineyard Haven MA USA

Wanted door access panel

Post by m15256 »

One of mine is just too rusty to paint. Somebody had NOS ones awhile ago but I can't find them now. Willing to buy anything that I can paint.
Thanks, Rick
RICK
M 152 CDN
M 56 (V41)
Top
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Wanted door access panel

Post by Cal_Gary »

I think I have a serviceable used spare, will post a photo later today (I'm at work right now).
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Top
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: Wanted door access panel

Post by Cal_Gary »

Here you go-there is some light back-side pitting and surface rust where the old felts were glued on, and one small divot that can be tapped flat easily. It has a number of coats of paint-I'd recommend stripping, priming and painting unless you prefer the weathered look. From the bottom, #1 is the front, #2 is the back, #3 shows the little divot. Make me an offer if you wish.
Gary
Attachments
door panel 3.JPG
door panel 3.JPG (14.39 KiB) Viewed 692 times
door panel 2.JPG
door panel 2.JPG (20.73 KiB) Viewed 692 times
door panel 1.JPG
door panel 1.JPG (25.16 KiB) Viewed 692 times
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Top
Post Reply

Return to “Swap Meet”