R U MISSING THE CNTR TAILGATE SPRT BRACKET

lten1063 · Post by **lten1063** » Wed Jun 25, 2014 2:47 pm

Are you missing the center support bracket for your tailgate. Will we are and we found one to look at in person. It is made out of thin tin = weak support. Well I made one for our M37. What do you think?

http://www.surfacezero.com/g503/showpho ... et&cat=500

Later Joe

combat32 · Post by **combat32** » Wed Jun 25, 2014 7:16 pm

Joe the pic didn't come thru, email it to me again and I can post it here for you.

ZGjethro · Post by **ZGjethro** » Wed Jun 25, 2014 9:43 pm

I only had the side supports when I built my tailgate. I didn't even know about the center support. My truck had no tailgate when I bought it from the fire department. I welded it up and used a solid cylindrical rod as the hinge and it was full bed width. The rest of the tailgate was welded to the rod and I have no flex at all when I sit on the tailgate when it is down

Post by **T. Highway** » Thu Jun 26, 2014 4:14 am

Joe,

I modified your image to a URL link, since the photo is hosted on the G503 site.

The bracket looks like it should work just fine.

Bert

R U MISSING THE CNTR TAILGATE SPRT BRACKET

R U MISSING THE CNTR TAILGATE SPRT BRACKET

Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET

Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET

Re: R U MISSING THE CNTR TAILGATE SPRT BRACKET