So I finally started tinkering on my M43 and noticed a small hole in the carb base venting smoke after shutdown, hole looks to be in line with the adjusting screw in the base and in about 3/4" of an inch, my M37 doesnt have this, it looks factory but i want to make sure as it seems odd. Ive look at some TMs but the pics are way to blurry to make anything out.
Thanks for any info
M43 question
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Re: M43 question
If you can me give a manual number and page number I'll see if I can post a clearer pic.
Someone else might be along soon with an answer, however.
Let me know.
52 M-42
Someone else might be along soon with an answer, however.
Let me know.
52 M-42
Re: M43 question
TM 9-2320-212-20 has a few pics from page 100 to 103 I believe but im not sure they are the right angle even if they are clearer, I didnt see any pics in the other TMs that would be helpful but I may have missed some, these are the TMs from steel soldiers.
Thanks for the help
Thanks for the help