O/T M113A2 parts

Discuss all non M37 related issues here

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
User avatar
HingsingM37
1SG
1SG
Posts: 1458
Joined: Sat Oct 20, 2007 3:43 am
Location: North Carolina

O/T M113A2 parts

Post by HingsingM37 »

I have a municipality who is a customer of mine that has aquired a M113A2 they wish to restore for parade use. They are looking for a parts source. Anybody have any ideas? Thanks :)
David
HingsingM37
1958 M37B1
1968 M101A1 Trailer
MVPA# 33078

"Do Not Take Counsel of Your Fears"
General George S. Patton Jr.

"Those who pound their guns into plows, will plow for those who do not".
Cal_Gary
Moderator
Moderator
Posts: 4353
Joined: Mon Oct 22, 2007 5:51 am
Location: Draper, Utah

Re: O/T M113A2 parts

Post by Cal_Gary »

He might try Surplus City Jeep parts (even though I don't use them any more due to their exorbitant shipping charges). Thye usually had some tracks out front when I lived relatively close--wish I could have picked up one of their M578 Recovery vehicles....
Gary
Cal_Gary
1954 M37 W/W
MVPA Correspondent #28500
G741.org Forum member since 2004
Brett
SSGT
SSGT
Posts: 308
Joined: Sun Dec 30, 2007 4:20 pm
Location: Murfreesboro, TN

Re: O/T M113A2 parts

Post by Brett »

Hingsing,

3 or 4 years ago we did a large project for BAE Systems in Anniston,AL. At the time they were doing a "Combat Reset" on a large number of M113's. They were stripping them down to bare hulls which were then blasted down to clean metal and all damage to the hulls was repaired. They were then repainted, and reassembled with all new or rebuilt parts. there were thousands of used tracks, road wheels, road arms, and every thing else you could imagine stacked up on pallets, Much of it still in useable condition. I don't know what happened to all these parts, but if I were looking for M113 parts I would possibly try BAE systems as they were making most parts themselves, or I would start contacting some Surplus dealers in or near Anniston, AL and see what kinds of leads they can get you.

Brett

BTW working on that job Made me fall in love with the sound of those Detroit Diesels. Every time they would fire one up and pull it off the end of the assembly line, I couldn't keep from smiling.
User avatar
HingsingM37
1SG
1SG
Posts: 1458
Joined: Sat Oct 20, 2007 3:43 am
Location: North Carolina

Re: O/T M113A2 parts

Post by HingsingM37 »

Very good. I will look into both of these. Thanks Guys!
David
HingsingM37
1958 M37B1
1968 M101A1 Trailer
MVPA# 33078

"Do Not Take Counsel of Your Fears"
General George S. Patton Jr.

"Those who pound their guns into plows, will plow for those who do not".
MikeOneSix
SSGT
SSGT
Posts: 330
Joined: Wed Nov 18, 2009 10:51 am
Location: H'Burg,VA

Re: O/T M113A2 parts

Post by MikeOneSix »

There's a fellow in Hazelton Pa named David Yamula who deals in AFV bits. If you contact him, he may be able to help. Here's his site: http://www.militaryvehiclesupply.net/ .


As for BAE systems, I'd imagine that unless you were a large firm or a forign Gov't, they probably aren't going to give you the time of day. Businesses like that don't really deal with individuals or in small amounts (meaning: enough for only one vehicle). There also may be a reg against them selling those parts to American (civilian) Citizens. That's just my $.02, though.

Matt

Just thought of this: You may also want to post your "wants" over in the "armored & tracked" sections of the www.g503.com as well as over on www.steelsoldiers.com there are more then a few M113 owner/operators over on those sites...Sadly, I am not one of them....
Never underestimate the power of stupid people in large groups
User avatar
HingsingM37
1SG
1SG
Posts: 1458
Joined: Sat Oct 20, 2007 3:43 am
Location: North Carolina

Re: O/T M113A2 parts

Post by HingsingM37 »

David Yamulla was able to help me. Thanks for the heads up :wink:
David
HingsingM37
1958 M37B1
1968 M101A1 Trailer
MVPA# 33078

"Do Not Take Counsel of Your Fears"
General George S. Patton Jr.

"Those who pound their guns into plows, will plow for those who do not".
MikeOneSix
SSGT
SSGT
Posts: 330
Joined: Wed Nov 18, 2009 10:51 am
Location: H'Burg,VA

Re: O/T M113A2 parts

Post by MikeOneSix »

HingsingM37 wrote:David Yamulla was able to help me. Thanks for the heads up :wink:
Good to know.......
Matt
Never underestimate the power of stupid people in large groups
Post Reply