Home Hey CUZ!
I am impressed!! I tried a couple of different ways and finally just went to the photo album!! Thanks for the help my Friend!!
Water pump question?
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
Tim Powell
- MSGT
- Posts: 827
- Joined: Mon Jan 26, 2009 1:32 pm
- Location: West Burlington IA.
Re: Water pump question?
Tim & Lori Powell
1952 Dodge M-37
1968 M101A1 Cargo Trailer
2011 F350 Ford Flatbed
MC-A1 Air Compressor Unit
Military Tank APU
"All that is necessary for the triumph of evil
is that good men do nothing."
1952 Dodge M-37
1968 M101A1 Cargo Trailer
2011 F350 Ford Flatbed
MC-A1 Air Compressor Unit
Military Tank APU
"All that is necessary for the triumph of evil
is that good men do nothing."
-
m37jarhead
- SFC
- Posts: 647
- Joined: Sun Jan 06, 2008 6:55 pm
- Location: Apache Junction, AZ.
Re: Water pump question?
Steve:
How about getting your original water pump rebuilt? It's so simple you might be able to do it yourself
and then you'll have an "original" pump with grease cup back in service. Wouldn't hurt to save the
"new" pump for a rainy day.
How about getting your original water pump rebuilt? It's so simple you might be able to do it yourself
and then you'll have an "original" pump with grease cup back in service. Wouldn't hurt to save the
"new" pump for a rainy day.
Member: Arizona Military Vehicle Collector's Club, Treasurer.
Past Pres
Member: MVPA #26600
Member: NRA
‘43 GPW, '53 M37 W/W, ‘54 M170 Field Ambulance,
59 M43, '76 M151A2, '86 CUCV,
'43 GPW, 416 & 101 trailers.
Past Pres
Member: MVPA #26600
Member: NRA
‘43 GPW, '53 M37 W/W, ‘54 M170 Field Ambulance,
59 M43, '76 M151A2, '86 CUCV,
'43 GPW, 416 & 101 trailers.
Re: Water pump question?
Tim,
Watch for a PM on how to post the photos. My good friend Brett talked me through it a while back. If you have any questions just get back to me.
Phillip
Watch for a PM on how to post the photos. My good friend Brett talked me through it a while back. If you have any questions just get back to me.
Phillip
Re: Water pump question?
M37jarhead, That was my original intention, but when I was taking the original apart I broke what looks like a steel thrust washer between the nose bushing and where the shaft goes through the housing by the seal. As that is not in the kit I would need to find one or try to replicate it. So for now I had a spacer made and will use that with the new water pump until I get the correct parts to fix the original one.
Steve
Steve