1954 m37 part out

xm708 · Post by **xm708** » Sun Jul 25, 2010 5:58 am

I just picked up an m37 from Maine and will be parting it out. Real nice bed. The bed is probably a 7 or 8 out of ten. no gate. stakes are there for the side boards and a few corner bows. The tires have excellent tread but side walls are cracked great for a plow truck ? soft top hardware complete. gas tank looks real nice but small dent when somebody tapped it with a forklift. excellent frame and axles. truck had 14 thousand miles on it. I am on Vacation and borrowing a computer but will be checking the site daily.. I have it listed on craigslist Hartford Connecticut and have limited pics here with me.

rickv100 · Post by **rickv100** » Mon Jul 26, 2010 2:58 am

I am interested in the stakes for the side boards and any seat hardware if you have it.

Thanks,

Rick

52m38 · Post by **52m38** » Wed Jul 28, 2010 7:05 am

I'm looking for a gas can holder and mounting brackets. Do you have them ? If you do how much And will you ship ?
My zip is 98290. Thanks. Brett

xm708 · Post by **xm708** » Wed Aug 04, 2010 4:40 am

yes I have one I will PM you the details.

PO62880 · Post by **PO62880** » Sat Aug 07, 2010 3:12 pm

I'm looking for some decent seat cushions both driver and passenger. Do you have any. If so could you email some pictures and how much you'd be looking to get for them. My e-mail is PO62880@aol.com

thanks

gene · Post by **gene** » Sun Aug 08, 2010 5:53 pm

Have you sold the gas tank yet? If not, I'd be real interested.
Gene

xm708 · Post by **xm708** » Tue Aug 10, 2010 8:05 am

still have the tank. I have yet to pull it out yet. The exterior has a dent from a fork lift other than that it seems solid. I would have to take a peek indside to be sure though. I am out of commission for a week or so with a shoulder injury so it may be a bit.

themoose74 · Post by **themoose74** » Tue Aug 10, 2010 9:26 am

Ed,

Received the box today. Everything looked as you described to me and it all arrived safely.

Thank you for your help, generosity and effort in getting the parts off of the truck.

Hope your shoulder gets better,

Bo

And I found the NOS part.

You must have felt very bad about that carburetor.

xm708 · Post by **xm708** » Tue Aug 10, 2010 5:55 pm

Bo

thanks again for the kind words. I do like helping people out and selling parts makes me the extra income to continue with the hobby so thanks goes back out at ya. The flange was a token of appreciation and maybe a bit to make up for the carb but I did warn ya !!

thanks again

ed

vtdeucedriver · Post by **vtdeucedriver** » Wed Aug 11, 2010 5:40 am

I will get on the ed praise ban waggon. He has bailed me out a few times now. Maybe some day I will find where my original parts went to in my BLACK HOLE of a garage!!! LOL.

How long you out for ED????
Thinking about making a trip up to look at that 52.

xm708 · Post by **xm708** » Wed Aug 11, 2010 7:14 am

Jeff

I am still working but my shoulder and neck aren't working so good. Come on over and bring the bedside and we can work something out. come over whenever you want I will be there anytime after 1700.

ed

themoose74 · Post by **themoose74** » Tue Jul 26, 2011 4:21 pm

Ed,

Brackets received in the mail today. That was exactly what I was looking for, Thank you!!

bo

xm708 · Post by **xm708** » Tue Jul 26, 2011 6:08 pm

No problem glad they made it...

1954 m37 part out

1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out

Re: 1954 m37 part out