RPM'S

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
8543bob
SSGT
SSGT
Posts: 318
Joined: Fri Jul 10, 2009 9:02 pm

RPM'S

Post by 8543bob »

Good morning all, I have 2 questions; I have been using my M quite a bit since the engine rebuild. Its 100% stock Wondering, whats the engine turning when I'm doing about 40-45MPH, I dont usually go over 45. Second; whats the PSI for the 16" NDT tires?? Thanks BOB
Lifer
1SG
1SG
Posts: 2096
Joined: Sat Oct 20, 2007 3:50 am
Location: Elberton, Georgia, USA

Re: RPM'S

Post by Lifer »

At 45 mph, your engine will be turning somewhere in the neighborhood of 2,000 RPM.
Tire pressure should not exceed 40 PSI.
"PER ARDUA AD ITER"
User avatar
W_A_Watson_II
SFC
SFC
Posts: 627
Joined: Sat Oct 20, 2007 7:02 am
Location: MO
Contact:

Re: RPM'S

Post by W_A_Watson_II »

Bob,

My calculations (http://m37.wawii.com/images/MyM37SpeedChart.gif) show that the 5.83 gears would put you at about 2600 RPM for 45 MPH.
Thanks,
Will
1946 Dodge Power Wagon
1953 Dodge M37 - "Frankenstein"
My 1953 Dodge M37 WEB Site
cuz
1SG
1SG
Posts: 1147
Joined: Fri Oct 19, 2007 9:40 pm
Location: Northwestern Wisconsin
Contact:

Re: RPM'S

Post by cuz »

And those figures will work only if the speedo is accurate. :wink:
Wes K
wsknettl@centurytel.net

54 M37, 66 M101, 45MB, 51 M38, 60 CJ5, 46 T3-C
MVPA 22099

Disclaimer: Any data posted is for general info only and may not be M37 specific or meet with the approval of some esteemed gurus.
Post Reply