Need a Messurement

k8icu · Post by **k8icu** » Mon Jul 26, 2010 7:19 pm

If someone could take a tape to their truck for me. I'd like to know the length of the steering colume from the dash to the steering wheel.

Thanks
Joe

k8icu · Post by **k8icu** » Wed Jul 28, 2010 6:02 pm

Really nobody could take a walk out to the garage and take a quick messurement for me? I'd mesure myself if my truck wasn't in a million pieces.

W_A_Watson_II · Post by **W_A_Watson_II** » Wed Jul 28, 2010 6:13 pm

I would but mine isn't stock anymore.

52m38 · Post by **52m38** » Wed Jul 28, 2010 6:20 pm

Joe, I get 10.5 from dash on top of the column to where the hub starts. Brett

HingsingM37 · Post by **HingsingM37** » Thu Jul 29, 2010 1:48 am

Sorry Joe, just read this. Yes, about 10.5" if you are talking about from the dash to the hub base.
Shoot me a PM next time you need something and I will be happy to help

PS. Collings aircraft at the museum August 13-16. Hope you can make it down.

k8icu · Post by **k8icu** » Fri Jul 30, 2010 8:47 am

Thanks for the reply...that helps me a lot.

Dave...shoot! I have to be at Camp Perry on that Saturday and I work at the library that Sunday....fuuwee!

You know I'm just going to have to make an appointment and drive on down to see you and your truck!

W_A_Watson_II · Post by **W_A_Watson_II** » Fri Jul 30, 2010 2:30 pm

I measured mine for the heck of it, and I'm at 10", but I'm running the stock column with a conversion to Power Steering.

k8icu · Post by **k8icu** » Sat Jul 31, 2010 6:58 am

10, 10.5 close enough..

Thanks everyone.

Need a Messurement

Need a Messurement

Re: Need a Messurement

Re: Need a Messurement

Re: Need a Messurement

Re: Need a Messurement

Re: Need a Messurement

Re: Need a Messurement

Re: Need a Messurement