Fire extinguisher,General Fire Guard, Quick Aid Model 85HD.
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Fire extinguisher,General Fire Guard, Quick Aid Model 85HD.
Is a Fire extinguisher, General Fire Guard, Sure Action, Quick Aid Model 85HD correct for a early M37?
Thanks,
Paddyofurniture
Thanks,
Paddyofurniture
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
I think after 53, the fire ext. was eliminated. I don't know which model I have, I'll check tomorrow.
Bruce,
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Thanks Bruce.
My truck is a 1952.
Thanks,
Paddy
My truck is a 1952.
Thanks,
Paddy
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Yes, that would be the correct one. I just checked, same thing in my 52. Get your Brasso out and give it some brand new under dash "bling"
....don't use the Brasso on the painted label part...
Where in NC are you ?
![Wink :wink:](./images/smilies/icon_wink.gif)
Where in NC are you ?
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Bruce,
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Thanks Bruce and Murf for your help.
My fire extinguisher General Fire Guard, Quick Aid Model 85 is panted OD and has a brass label. with a over coat of OD.
It is 98 degrees with thunderstorms just outside or Greensboro, NC.
Thanks again for your help.
Take care Brothers,
Paddy
My fire extinguisher General Fire Guard, Quick Aid Model 85 is panted OD and has a brass label. with a over coat of OD.
It is 98 degrees with thunderstorms just outside or Greensboro, NC.
Thanks again for your help.
Take care Brothers,
Paddy
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
I have the same extinquisher that Bruce pictured. Mine is a bit older though. It is a 1qt Pyrene from Newark NJ. The guy I got it from was an owner of a hardware/fishing tackle shop and he was having a sale when he retired. I stopped in and noticed the extinguisher hanging on the wall from a nail. I asked him if it was for sale and he hesitated and asked why I was interested in it. I explained that I had been working on a M37 and it still had the original bracket for a carbon tet extingusher. He told me how the extinguisher on the wall was a momento from WW2. It was from a jeep he drove across Europe after he landed in France a couple weeks after D-day. Why he took that puzzled me. I guess it wouldn`t raise to many eye brows if he shipped it home. He handed me the extinquisher and said I could have it for free as he appreciated people saving history.
Any 1qt Carbon tet extinquisher would work in the M37. Many of the extinquishers were Pyrene or General. They had a tendency to disappear as the carbon tet would clean anything and was used extensivly as a stain remover. It was also used for cleaning electrical components like motors and generators. The US Army vehicle field expediency book shows a carbon tet extinquisher being used to clean a generator on a vehicle. They were common in many places from Military vehicles to offices across the country. They pretty much disappeared when it was made public that carbon tet rated very high among substances known to cause cancer. Nasty stuff.
TJ
Any 1qt Carbon tet extinquisher would work in the M37. Many of the extinquishers were Pyrene or General. They had a tendency to disappear as the carbon tet would clean anything and was used extensivly as a stain remover. It was also used for cleaning electrical components like motors and generators. The US Army vehicle field expediency book shows a carbon tet extinquisher being used to clean a generator on a vehicle. They were common in many places from Military vehicles to offices across the country. They pretty much disappeared when it was made public that carbon tet rated very high among substances known to cause cancer. Nasty stuff.
TJ
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
M42Dodge,
Thank you for the info.
I do remember carbon tet with a " smile " .
When I was in Berlin Germany, 1976 to 1980 it made a great cleaner. I work as a 63B20, wheel mechannic. Worked great to clean weapons as well.
Great story on you fire extinguisher.
I got mine at a Gun Show. You will never know what you will find.
Paddy
Thank you for the info.
I do remember carbon tet with a " smile " .
When I was in Berlin Germany, 1976 to 1980 it made a great cleaner. I work as a 63B20, wheel mechannic. Worked great to clean weapons as well.
Great story on you fire extinguisher.
I got mine at a Gun Show. You will never know what you will find.
Paddy
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Gents...
I also recently acquired one of these vintage brass beauties for my M37. I hate having a rack/bracket that is empty! Up here in Ontario, they are quite plentiful! I see them all the time at antique stores ranging in price from $15 to $50. If anyone else wants one, let me know. I can probably find one and ship it to ya.
Ty
I also recently acquired one of these vintage brass beauties for my M37. I hate having a rack/bracket that is empty! Up here in Ontario, they are quite plentiful! I see them all the time at antique stores ranging in price from $15 to $50. If anyone else wants one, let me know. I can probably find one and ship it to ya.
Ty
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Tyroma,
I will keep it in mind for my next truck.
Is the $15 to $50 include the mounting bracket?
Thanks,
Paddy
I will keep it in mind for my next truck.
Is the $15 to $50 include the mounting bracket?
Thanks,
Paddy
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
You dont often see the extinquishers with the vehicle brackets. The ones I have seen in antique stores usually have the stamped steel wall mount if any at all. The M37 bracket would have two cam straps that hold the extinquisher. They should be somewhat available but I really couldnt say as I never looked for one...
TJ
TJ
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Mine was an ebay snag, 15$ quite a while back, the bracket was an Aberdeen flea market catch three semolians, the guy had a few boxes of them.
Bruce,
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
1953 M-37 w/ow
Retired Again
Keep Em Rollin'
VMVA
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
My extinguisher with bracket was from a Gun Show and I payed $25 OTD.
Paddy
Paddy
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
[quote="Paddyofurniture"]Tyroma,
I will keep it in mind for my next truck.
Is the $15 to $50 include the mounting bracket?
Thanks,
Paddy[/quote]
Hey Paddy...
Nope...just the extinguisher. I will grab the next one I find, and post it for sale here on the board.
Ty
I will keep it in mind for my next truck.
Is the $15 to $50 include the mounting bracket?
Thanks,
Paddy[/quote]
Hey Paddy...
Nope...just the extinguisher. I will grab the next one I find, and post it for sale here on the board.
Ty
-
- SGT
- Posts: 219
- Joined: Sun May 02, 2010 7:16 am
- Location: NC
Re: Fire extinguisher,General Fire Guard, Quick Aid Model 85
Can someone post a photo or two on what the mounting bracket looks like?
Thanks,
Paddy
Thanks,
Paddy