Knuckle cleanup

Gerry · Post by **Gerry** » Wed Apr 14, 2010 9:48 am

Ant tricks to smoothing out my front knuckles before reassembly. Fine sanding cloth?
Thanks,

Post by **Cal_Gary** » Wed Apr 14, 2010 3:19 pm

I used sand paper and carb cleaner to shine mine up.
Gary

Lifer · Post by **Lifer** » Wed Apr 14, 2010 6:56 pm

I hope it was "wet-or-dry" sandpaper and 600-grit or finer! My choice would have been 1200-grit emery cloth and I probably wouldn't have thought of the carb cleaner until after I had the first one all prettied up.
Some 0000 steel wook might also work. Just a few possible ideas.