screw Needed for E Brake

SierraM37 · Post by **SierraM37** » Wed Mar 31, 2010 9:17 am

Anyone know the size of the screw that threads through the three holes on the emergency brake band directly adjacent to the J Bolt? Want to know if I can fab something or procure locally with something similar and modify it.

Part number is NP-35775 according to figure 08-3 on page 212 of the exploded parts manual I have. It also appears to be double nutted on top. If I get that done, the transfer case is complete. Thanks in advance.

MSeriesRebuild · Post by **MSeriesRebuild** » Wed Mar 31, 2010 2:42 pm

SierraM37 wrote:Anyone know the size of the screw that threads through the three holes on the emergency brake band directly adjacent to the J Bolt? Want to know if I can fab something or procure locally with something similar and modify it.

Part number is NP-35775 according to figure 08-3 on page 212 of the exploded parts manual I have. It also appears to be double nutted on top. If I get that done, the transfer case is complete. Thanks in advance.

It is simply a 1/4" bolt, easy access where bolts are sold, you can either double nut after adjusting as you mentioned or use 1 self locking nut.

SierraM37 · Post by **SierraM37** » Wed Mar 31, 2010 3:12 pm

Thanks Charles once again for the simple and effective advice. Cheers.

screw Needed for E Brake

screw Needed for E Brake

Re: screw Needed for E Brake

Thanks Charles