M43 (XM152) parts WANTED!

russcal · Post by **russcal** » Thu Aug 06, 2009 10:58 pm

Heya, y'all!

Got a little cash flow going again so time to renew the search.

I have a XM152 and am in search of the following off of either a M43 or XM152:

1. Rear step, when folded up acts as rear center seat.

2. Rear door swing arms. Go from inner top corners of door to inside corner of box, keeps door from swinging open too wide. Also door mounted tracks for these.

3. Rear window (in doors) frame. There is something that mounted over / around the inside rear windows. Don't know what it is, but I'm missing it. I know that the ambulance typically had a black out curtain that rolled up when open. I've also seen on the one other XM152 that I'm aware off, a security screen. Don't know if this was typical of XM152's or just the other vehicle, as it was a Security Police paddy wagon.

4. Rear door inside door handle. Might be the same as regular door handle but I don't know either way.

Generic M37 parts needed: black-out driving light, gas tank filler neck extension, the piece with the screen.

Thanx for looking, I hope you can help, and thanx to those guys in the past that helped me find parts.

Russ
Proud son of Rose and Wes

Post by **Cal_Gary** » Fri Aug 07, 2009 6:09 am

Hi Russ,
I have a pair of used front markers that also have the clear lenses. I haven't had the covers off so I don't know how the internals look-they were part of a package deal when I scored my long-sought-after B/O Drive light. I'll take a look tonight and post the details. I'm in CA too, so shipping wouldn't be too much....
Gary

russcal · Post by **russcal** » Fri Aug 07, 2009 7:33 am

Thanx, Gary! I look forward to seein' what you have!

Russ
Proud son of Rose and Wes

Post by **Cal_Gary** » Mon Aug 10, 2009 5:08 am

PM sent, Russcal.
Gary

russcal · Post by **russcal** » Fri Aug 21, 2009 10:26 am

Heya, all!

Thanx to Cal Gary, I have a nice set of front turn lights to put on my rig now!

Still looking for the other parts!

Thanx again, Gary, Rick, Lifer!

Russ
Proud son of Rose and Wes

Post by **Cal_Gary** » Fri Aug 21, 2009 11:46 am

You're welcome Russ-it's like Christmas every time I get another box of parts, too!

Gary

russcal · Post by **russcal** » Mon Feb 01, 2010 9:15 pm

Heya, all!

Time for an update....

Still looking for a rear step / seat. Also any actual XM152 rear interior parts.... my truck had left and right bench seats during it's working days, so any of those specific parts would be wanted.

I would also like to give a big thank you to Rick (Rick C), Bruce (m-37Bruce), Gary (Cal Gary), and Brian (cessna) for the parts and assistance they've provided.

Thanx again, gents!

Russ
Proud son of Rose and Wes

1953 XM152