Parting out 52 M37

Brett · Post by **Brett** » Thu Jul 30, 2009 5:49 pm

I went and bought a rusty parts truck last weekend, and I'm going to start selling off some of the stuff I'm not going to need. It has a correct but rusty hard top. It appears to all be there except for the back glass. It is badly rusted, and the panels have started to seperate, and there are some rust through spots. the metal headliner looks useable, and If you wanted a hard top REALLY BAD you could probably save the whole thing. The truck has a chevy straight 6 and unknown trans. It will have 2 front fenders, radiator, transfer case, driver door is dented from hitting fender, but not too bad otherwise, both axles, 4 wheels, fire ext mount, seat frames, and lots of other stuff. If you need something or have any questions, Just ask. Just make me a reasonable offer on whatever you need. I'm located in Murfreesboro,TN Just SE of Nashville.

Thanks,
Brett

powerwagontim · Post by **powerwagontim** » Thu Jul 30, 2009 7:19 pm

Hi Brett,
Is the passenger seat bottom decent? I would be interested in that and the fire extinguisher mount.
Thanks,
Tim

Brett · Post by **Brett** » Fri Jul 31, 2009 4:27 pm

Tim, I sent you an email with some pics. The seat bottom is in fair but not new condition. two corners are a little banged up a little, but the plywood is not delaminating. It could easily have a new cover and foam installed and be good to go.

Thanks
Brett

poor rich · Post by **poor rich** » Fri Jul 31, 2009 6:44 pm

any chance of getting a pict. of the drivers door, and how much do you want?
Rich

Brett · Post by **Brett** » Sat Aug 01, 2009 6:34 am

Rich,
I sent you an email with several pics. The door is not as good as I had first thought. I think it is still fixable, but will take some work. The glass is intact, but a little cloudy near the bottom, and has some pitting near the top. The latch and regulator work, but are a little stiff, probably needs cleaning and lubed.

Brett

Josh · Post by **Josh** » Mon Aug 03, 2009 9:41 am

any chance of a good tailgate? I need one where the bottom 1/2 is in good shape... the top 1/2 of mine is in great shape, but the mount tube and rolled metal is all rotted through...

Brett · Post by **Brett** » Mon Aug 03, 2009 2:25 pm

Sorry, no tailgate on this one.

Brett

Brett · Post by **Brett** » Tue Aug 04, 2009 5:52 pm

I sold the rear diff, and axle shafts today. I still have alot of useable parts on this truck including seats, fire ext. mount, drivers door, RUSTY Hard top, front fenders, radiator, etc. I posted some pics in the gallery under Brett Bunnell, and will try to post some more soon. I really don't need alot of this stuff, and I want to find it a good home. Make me an offer on whatever you want.

Thanks
Brett

ICSmoke · Post by **ICSmoke** » Tue Oct 05, 2010 8:21 pm

Do you have the brackets that the tailgate uses (truck side)?

k8icu · Post by **k8icu** » Wed Oct 06, 2010 4:27 am

How about the transmission cover. Good condition and not messed up?

Brett · Post by **Brett** » Sun Oct 10, 2010 12:08 pm

Sorry,
No tailgate hinges or trans covers.

Ben · Post by **Ben** » Tue Oct 12, 2010 7:52 pm

Josh
I have a tailgate that may work for you. PM set

Parting out 52 M37

Parting out 52 M37

update

Re: Parting out 52 M37

Re: Parting out 52 M37

Re: Parting out 52 M37

Re: Parting out 52 M37