Drivability has greatly increased.
Getting aligned is a bigger task than I thought. It was way toe out! Other than that the back/front tracks spot on.
Search found 121 matches
- Sat May 25, 2024 4:32 am
- Forum: Builders Blog
- Topic: New to me '52 M37
- Replies: 44
- Views: 22711
- Thu May 23, 2024 4:36 pm
- Forum: Technical group
- Topic: Gearshift Play: 4th
- Replies: 3
- Views: 75
- Thu May 23, 2024 10:21 am
- Forum: Technical group
- Topic: Gearshift Play: 4th
- Replies: 3
- Views: 75
Gearshift Play: 4th
Was just wondering...
When in 4th, how much 'side-to-side' movement is in the stick (measured at the top of the gearshift)?
1-2", 3-4", none
Yeah, great technical question.
When in 4th, how much 'side-to-side' movement is in the stick (measured at the top of the gearshift)?
1-2", 3-4", none
Yeah, great technical question.
- Thu May 23, 2024 3:41 am
- Forum: Technical group
- Topic: New Noise
- Replies: 11
- Views: 1291
- Sun May 19, 2024 2:32 am
- Forum: General M37
- Topic: Winch Hole Plug
- Replies: 7
- Views: 115
Re: Winch Hole Plug
This is not a historical restore so it's a low priority item. The hole just bugs me.
Eventually I'll find one or figure something out.
Eventually I'll find one or figure something out.
- Sat May 18, 2024 10:05 am
- Forum: Builders Blog
- Topic: New to me '52 M37
- Replies: 44
- Views: 22711
Re: New to me '52 M37
Changed the plugs and tossed the resistance wires for solid core. The .mil distributor had the waterproof cap removed to expose the inner cap and had regular wires. Now I know why. The waterproof wires are expensive! Ended up making a custom length set. 8mm wires fit perfectly into the inner cap tow...
- Sat May 18, 2024 7:24 am
- Forum: General M37
- Topic: body mount questions
- Replies: 12
- Views: 195
Re: body mount questions
No rubber from what I could see.
Side mounting: Bottom mount:
Side mounting: Bottom mount:
- Fri May 17, 2024 5:59 pm
- Forum: General M37
- Topic: Winch Hole Plug
- Replies: 7
- Views: 115
- Fri May 17, 2024 12:04 pm
- Forum: Technical group
- Topic: Turn Signals not working
- Replies: 4
- Views: 94
Re: Turn Signals not working
I have redone all the grounds and replaced bulbs. I checked all connections and cleaned and reconnected. I have lights in all the right places but no flashing. Still have the .mil flasher unit? Swap it for a 24v civilian flasher. A two pole will work. There are 3 wires going to the.mil flasher, one...
- Fri May 17, 2024 9:26 am
- Forum: General M37
- Topic: body mount questions
- Replies: 12
- Views: 195
- Fri May 17, 2024 6:43 am
- Forum: General M37
- Topic: body mount questions
- Replies: 12
- Views: 195
Re: body mount questions
Hope this helps?
I will look later today.
I will look later today.
- Wed May 15, 2024 6:10 pm
- Forum: General M37
- Topic: Winch Hole Plug
- Replies: 7
- Views: 115
Winch Hole Plug
Has anyone successfully found a plug for the winch lever hole in the drivers floor? Just doesn't seem right to tack weld a cover..
What have you used, if anything?
What have you used, if anything?
- Thu May 09, 2024 8:59 am
- Forum: Builders Blog
- Topic: New to me '52 M37
- Replies: 44
- Views: 22711
Re: New to me '52 M37
Pertronix units don't like copper plug wires Confused... This is a MIL distributor. I was told if you have the military waterproof distributor, metallic core (copper) cables are preferred. If your distributor has been replaced with a civilian type distributor, a non metallic core cable must be used...
- Mon May 06, 2024 11:30 am
- Forum: Builders Blog
- Topic: New to me '52 M37
- Replies: 44
- Views: 22711
Re: New to me '52 M37
Next question:
There are AC Delco R45 plugs in it now. The previous owner used regular wires from the .mil distributor.
The points have been changed to the Pertronix module. Any suggested change in plugs or gap?
There are AC Delco R45 plugs in it now. The previous owner used regular wires from the .mil distributor.
The points have been changed to the Pertronix module. Any suggested change in plugs or gap?
- Thu May 02, 2024 4:32 pm
- Forum: General M37
- Topic: Denton NC 2024 Rally
- Replies: 6
- Views: 259
Re: Denton NC 2024 Rally
Wanted to get there but the grandkid had a game. Priorities and such...
Maybe next year I'll get the beast started and get there. It's only 1.5hrs by car, 3hrs by M37.
Maybe next year I'll get the beast started and get there. It's only 1.5hrs by car, 3hrs by M37.