Thank you all for the help! and sorry of the late response. I was able to purchase, at great expense mind you, the double bearing and I am in the process of installation. When I pulled the seal, I found that the bearing was not broken but it was not adjusted properly, meaning that the pinion was loo...

Hello and Happy Veterans Day! Hope someone can help me with some information. I have a 1952 M37and I am looking for the front axel pinion bearing. Is the one that goes on the rear part of the axle that connect to the drive shaft. From the information I found it is a double bearing set number 44363-D...

Hello, I purchased an NOS wire harness with Douglas connectors and I am trying to install it in my project. I bought it thinking that there was no difference between early and late models other than the connectors themselves. I believe my vehicle is the late model B1 because the person I bought it f...

Thank you Sebastian. Great help!

Where is the control valve located for the folberth motors? mine does not seem to have a on/off switch like the ones on the diagram. I have those motors on my M38 but the folberth motors are different and I am not familiar with how they work, turn on, etc.

Hello again. I am installing the vacuum wiper system and putting the folberth motors. does anyone have a diagram of how the lines are routed and how the system works?

Thank you in advance.

Rafael

Thank you Andy. I will do that.

I also found that the belt pulley goes in the pulley hub only one way. One of the bolts is at a different position and it only fits one way.

Thank you!

Hello, I am slowly restoring my '58 M37 and found that my timing chain cover did not have the timing pointer and the Crankshaft pulley was from a different model vehicle and did not have timing marks either. I installed the proper timing chain cover and I am about to install the pulley hub with a pr...

Hello. Working on a restoration project and I am installing the oil filter assembly on my 58' M37. Can anyone tell me what is the size of the metal lines that come out of the block and connect to the flex rubber hoses? The feed line that come out of the first oil gallery port and the return line tha...

hello. anyone has a spark plug wire set for M37 that is willing to sell.

I am located in Orlando, FL

Hello,

Looking for generator, voltage regulator, spark plug wires for '58 M37b1.

I am located in Orlando, Florida

Thank you Gary! I appreciate the help. So to clarify, the seat backrest is put over the tracks, the cushion board on top and then all bolted together?

Hello, I am restoring my 1958 M37 and currently working on fixing the drivers seat. I have the rails and the seat back support. I am not sure what goes on the bottom. All I know is that the cushion springs go on a wood board, but I am not sure if anything else goes under that wood board. Does anyone...

John,
Thank you for the information. I will check the link.

Hello, My name is Rafael and I am new to this forum. I own a 1952 M38 jeep and recently purchased a 1958 M37b1 cargo truck which I will be restoring. I just started the project, and the first thing I am looking for is a set of tires. My problem is that in Puerto Rico, where I am located currently, i...