Starting the journey to rebuild a 1953 M37. I have long been looking for a 50's Power Wagon and ran across this in the back of a photo for some farm equipment. A 2 hour journey, and a handshake later, she was on my trailer and on the way to her new life.
Here is the first post.
So far i've cleaned 20 years of dust off, pulled the damaged (but present) canvas cover off, and removed the rats nest infested old upholstery.
I'm a big fellow so i started removing the bed to more easily access the rest of the back end. This thing is nearly rust free except the square tube and the rear of the bed where presumably water got trapped and rusted through.
Initial Photo:
Full Gallery:
https://photos.app.goo.gl/KrgyqGbzAHPoTvEG6
1953 M37 - Barn find 2023
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- Moderator
- Posts: 1801
- Joined: Thu Jul 09, 2009 4:57 am
- Location: S.E. Wisconsin, USA, Earth
Re: 1953 M37 - Barn find 2023
Welcome to the site, we look forward to seeing more pictures of this project as it progresses.
Please update your profile to include your general location.
Regards,
Bert
Please update your profile to include your general location.
Regards,
Bert
Re: 1953 M37 - Barn find 2023
Truck looks nice, straight, and largely rust-free. From the data plate, it appears to be a 1951. You did well. Congratulations.
John
M37B1-Oct 19,1958
MVPA 17461
M37B1-Oct 19,1958
MVPA 17461
Re: 1953 M37 - Barn find 2023
Congrats on the acquisition, now the fun begins!
(I'm being a bit ironic too)
Regarding the year, the delivery date is not matching the serial: #80017370 should be dropping within the January 1952 range. But hey, nothing is 100% accurate on this MVs, don't worry.
(I'm being a bit ironic too)
If you're talking about the tool box on the bed don't stress out, usually is a mess after decades. Mine was destroyed, and after rebuild I've put special attention with the epoxy right there.
Regarding the year, the delivery date is not matching the serial: #80017370 should be dropping within the January 1952 range. But hey, nothing is 100% accurate on this MVs, don't worry.
Sebastian
(sorry, I only speak in METRIC)
(sorry, I only speak in METRIC)