Winch bushing bearing problem help needed

Discuss fixes, upgrades and modifications to your M37

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Post Reply
delta31
PFC
PFC
Posts: 57
Joined: Tue Mar 24, 2020 4:09 am

Winch bushing bearing problem help needed

Post by delta31 »

We got the drum shaft bushing out of the clutch housing. This bushing has a much bigger OD
Than the nos replacement bushing. The OD of the one that came out is around 2.086 instead of 2.002 that it should.

Has anyone encountered that? Could it be a repair? Any ideas for sorcing a replacement?
Thanks
Top
Elwood
MSGT
MSGT
Posts: 937
Joined: Mon Oct 24, 2011 9:34 am
Location: Water Winter Wonderland

Re: Winch bushing bearing problem help needed

Post by Elwood »

McMaster-Carr will have what you need. I'd use SAE660 material.
“When a long train of abuses and usurpations, pursuing invariably the same Object evinces a design to reduce them under absolute Despotism, IT IS THEIR RIGHT, IT IS THEIR DUTY, TO THROW OFF SUCH GOVERNMENT...” -Declaration of Independence, 1776
Top
Post Reply

Return to “Technical group”