Hi Guys,
Got a buddy looking for a part, he needs the filler tube for the gas tank. Not the big piece that bolts onto the fender with the gas cap, he needs the pipe that screws into the tank itself and gets the short rubber hose that connects it to the big filler. Anyone here have a rotted out or bashed up tank that could help him out?
Thanks,
Tim
Looking for a part
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
-
- SFC
- Posts: 744
- Joined: Thu Dec 18, 2008 4:49 pm
- Location: Monkton, Vermont
- Contact:
Looking for a part
Happiness is enjoying what you already have!
- sturmtyger380
- SFC
- Posts: 573
- Joined: Sun Oct 21, 2007 5:13 pm
- Location: Up State SC
Re: Looking for a part
That small metal tube I think you are talking about is just a normal big flare fitting that screws into the fitting on the side of the tank. I don't remember the size right now.
Give John a call at Midwest Military - https://midwestmilitary.com/
Give John a call at Midwest Military - https://midwestmilitary.com/
47 CJ2A
53 M38A1
52 M37
51 M38
67 M416
?? M101A1
53 M38A1
52 M37
51 M38
67 M416
?? M101A1
Re: Looking for a part
Nah, he's asking for the 2" diameter or so piece the gas goes thru.
PoW
PoW
Re: Looking for a part
Just a thought but has he tried a exhaust shop? They would have that size pipe and might have a mandrel that would flare the one end close to the size he needs.
-
- SFC
- Posts: 744
- Joined: Thu Dec 18, 2008 4:49 pm
- Location: Monkton, Vermont
- Contact:
Re: Looking for a part
An exhaust shop could make the pipe, but it would still need to be threaded. So much easier to unscrew one from a dead tank!
Thanks for the thought.
Thanks for the thought.
Happiness is enjoying what you already have!