Crush washers
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Crush washers
Hi, does anyone know the napa numbers for the wheel cylinder crush washers? I bought some there in the past but can’t seem to find the numbers now. Thanks in advance.
Re: Crush washers
I don't remember but just bought mine from VPW, plus of course spares, as I often damage parts when installing them, and like to have "back-up" parts readily available. I am sure other vendors have sets of brake fittings available too. NV
Re: Crush washers
I believe the numbers are Napa 3877 for the Inner and 3878 for the outer. If I remember correctly .
1954 M37 WO/W
1969 M101A1
1967 M416
1969 M101A1
1967 M416
-
- Posts: 7
- Joined: Fri Jul 30, 2021 8:09 pm
- Location: Wasilla, Alaska
Re: Crush washers
Thanks for the part numbers, I am currently replacing all my brake cylinders, this will same me time on running around. Checking the cylinder I notice what may be Very old grease (?) between the boot and the piston.
1963 M151
1964 M416
1963 M37B1
1964 M416
1963 M37B1
-
- Posts: 7
- Joined: Fri Jul 30, 2021 8:09 pm
- Location: Wasilla, Alaska
Re: Crush washers
I bought a set of the NAPA ones and found the outer washer had to be reamed a little bit to fit over the shoulder of the bolt, wasn't a big deal. Just took my dermal and reamed out each washer.
Thanks for listing the numbers.
Thanks for listing the numbers.
1963 M151
1964 M416
1963 M37B1
1964 M416
1963 M37B1