SIDE BOARD KIT AND COVER NEEDED!

Buy and sell M37 and related stuff

Moderators: Cal_Gary, T. Highway, Monkey Man, robi

Forum rules
Your Location must be included in your advertisement or it may removed without notice.
Post Reply
User avatar
Tim Powell
MSGT
MSGT
Posts: 827
Joined: Mon Jan 26, 2009 1:32 pm
Location: West Burlington IA.

SIDE BOARD KIT AND COVER NEEDED!

Post by Tim Powell »

Hey Crew.
Where do I start looking for the side boards, top bows and cover for the back of my Lori's 1952 M-37?
HELP!
Image
Tim & Lori Powell
1952 Dodge M-37
1968 M101A1 Cargo Trailer
2011 F350 Ford Flatbed
MC-A1 Air Compressor Unit
Military Tank APU

"All that is necessary for the triumph of evil
is that good men do nothing."
52 M-42
SFC
SFC
Posts: 741
Joined: Fri Feb 03, 2012 12:56 pm

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by 52 M-42 »

You should go check out all the "usual suspects", Tim.

Snake River has most of the parts I believe at reasonable prices. John at Midwest Military also might have some or all of the metal parts you'll need. Vintage Power Wagon might be another place to try.

The swap meet thread here would probably be best and there is always the Steel Soldiers website too.

I don't have any extra metal parts for the bows and sides, or you could have them.

The wood you just make yourself with a table saw, router and sander (don't even really need the router, but it makes the edges nicer).

You should really try to use white oak like the originals, but it ain't cheap.

Good luck with your project, and don't forget the pictures!

52 M-42
Carter
1SG
1SG
Posts: 1840
Joined: Sat Oct 20, 2007 4:48 am
Location: Southeast Corner of Penn's Woods

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by Carter »

Army Surplus Warehouse has lazyback steel post sets Tim. I bought a set from them years ago, removed the old wood pieces, blasted, painted and they looked like new.

http://www.armysurpluswarehouse.com/mil ... k-set.html

I have a set of top bows for a trailer that will fit an M37 but lack provisions for the straps that allow the cargo cover to be rolled up and secured. PM me if interested and I'll shoot some pics and price to you.
Carter
Life Member:
Delta, Peach Bottom Fish & Game Assn.
User avatar
w30bob
1SG
1SG
Posts: 2213
Joined: Mon Apr 02, 2012 8:23 am

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by w30bob »

Carter,

ArmySurplusWarehouse has some interesting things.....but they're shipping charges are outrageous. I intend to call them to ask why, but I put together what would be a small box of parts on their order form and it says it's $80 to ship it UPS Ground. Nothing heavy either. So I'd like to get some stuff from them.....but I feel I'm getting ripped of on the shipping.

regards,
bob
rickv100
SGT
SGT
Posts: 194
Joined: Fri Apr 04, 2008 4:47 am

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by rickv100 »

Midwest Military is making repro bow corners for the m37. They also carry the lazy back and seat parts.
I went with white oak planks for my Dodge. I bought rough planks and planed them to desired thickness. Ripped to width on a table saw and rounded edges over with a router bit.
Carter
1SG
1SG
Posts: 1840
Joined: Sat Oct 20, 2007 4:48 am
Location: Southeast Corner of Penn's Woods

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by Carter »

w30bob wrote:Carter,

ArmySurplusWarehouse has some interesting things.....but they're shipping charges are outrageous. I intend to call them to ask why, but I put together what would be a small box of parts on their order form and it says it's $80 to ship it UPS Ground. Nothing heavy either. So I'd like to get some stuff from them.....but I feel I'm getting ripped of on the shipping.

regards,
bob
I guess shipping rates have changed since I ordered a generator control box 3 years ago. It cost $50, weighed 5 # shipping was only $15. Calling them is a good idea Bob, that $80 must be a mistake, I would ask about sending them a UPS prepaid shipping label.
Carter
Life Member:
Delta, Peach Bottom Fish & Game Assn.
User avatar
Tim Powell
MSGT
MSGT
Posts: 827
Joined: Mon Jan 26, 2009 1:32 pm
Location: West Burlington IA.

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by Tim Powell »

Thanks Guys!!
I'll take all this info into consideration. I also will be posting a question about my tail lamps!
Has anyone heard from Bill Lamers lately??????
Tim & Lori Powell
1952 Dodge M-37
1968 M101A1 Cargo Trailer
2011 F350 Ford Flatbed
MC-A1 Air Compressor Unit
Military Tank APU

"All that is necessary for the triumph of evil
is that good men do nothing."
Snake River 4x4
PVT
PVT
Posts: 11
Joined: Fri Apr 05, 2013 6:27 pm

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by Snake River 4x4 »

If you have concerns with Army Surplus Warehouse shipping. Call and talk to Jak, he is a real good guy to deal with, and he is the one that is the foreman for the catalog shipping.
User avatar
w30bob
1SG
1SG
Posts: 2213
Joined: Mon Apr 02, 2012 8:23 am

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by w30bob »

Thanks Tom.....I'll make sure to talk to Jak when I call. Might be a week or two....I ended up spending my M37 allowance on some other parts online. But I'll get to Jak.

Thanks for the info,
bob
User avatar
Tim Powell
MSGT
MSGT
Posts: 827
Joined: Mon Jan 26, 2009 1:32 pm
Location: West Burlington IA.

Re: SIDE BOARD KIT AND COVER NEEDED!

Post by Tim Powell »

I thank you all as well! Most excellent intel!
Tim & Lori Powell
1952 Dodge M-37
1968 M101A1 Cargo Trailer
2011 F350 Ford Flatbed
MC-A1 Air Compressor Unit
Military Tank APU

"All that is necessary for the triumph of evil
is that good men do nothing."
Post Reply