Home 
Anyone change out the filament bulbs to 24v LEDs? I'm looking for the Stop/Turn and Marker (tail) lights.
From what I can research the Stop/Turn are #1156 and are commonly replaceable with equivalent LEDs.
The markers, #1251, not so easy...
Filament to LED Light Bulbs??
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Filament to LED Light Bulbs??
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch.
Planned: Seatbelts, Bimini top
Planned: Seatbelts, Bimini top
Re: Filament to LED Light Bulbs??
Some flasher systems will not work with LED lights. Something about the different resistance of LEDs throws them off.
1951 M37 "Brutus" w/Winch and 251 engine
Re: Filament to LED Light Bulbs??
Already converted to a Signal Stat 900 and LED compatible flasher.
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch.
Planned: Seatbelts, Bimini top
Planned: Seatbelts, Bimini top
Re: Filament to LED Light Bulbs??
The Stop/Turn bulbs can be changed with a LED 1156 rated at 12-24v. Since the Mil housings don't have reflected interiors be sure to get the ones with LEDs on the end.
Output is a little brighter than the dual filament bulb. At least there's some draw reduced on the minimal 25a generator.
- 20240410_075521.jpg (149.95 KiB) Viewed 78 times
1952 M37 - Mods = Locking hubs, battery switch, 2 bank charger, PB, PS, Pertronix SSI, Elect fuel pump w/filter&pressure switch.
Planned: Seatbelts, Bimini top
Planned: Seatbelts, Bimini top