extra deep spark plug sockets

monkeymissile · Post by **monkeymissile** » Tue Jun 24, 2008 7:45 am

Curious as to what folks use for removal of the stock waterproof spark plugs. I know it has to be extra deep to clear the collar, but online searches so far don't give me enough info and was wondering if someone could recommend a brand they know works. Thanks.

Justin

tmbrwolf · Post by **tmbrwolf** » Tue Jun 24, 2008 9:26 am

I use a standard 1/2" drive deepwell socket, fits fine.

monkeymissile · Post by **monkeymissile** » Tue Jun 24, 2008 9:45 am

Ken,
thanks, I'll pop over to Sears.....

Nickathome · Post by **Nickathome** » Wed Jun 25, 2008 8:13 am

I've used a simple open end wrench to remove mine. I forget the size (I think its 11 or 13 /16ths) but it usually takes one wrench on the wire and one holding the plud to loosen the wire. Once the wire is off, I then use the same open end wrench to loosen the plug enough to unscrew.

monkeymissile · Post by **monkeymissile** » Wed Jun 25, 2008 8:26 am

without being at my truck, it looks like an offset 13/16" box-end wrench might also do the trick

extra deep spark plug sockets

extra deep spark plug sockets

Plugs