reduction starter

52nblue · Post by **52nblue** » Wed Jan 25, 2017 5:27 pm

Hi,my nane is mike and I just wanted to say I just installed my new 12 volt reduction starter purchased from Charles talbert at m series rebuild. Works great,quiet and spins engine over faster than the 24 volt starters on my other m 37s. The starter drive marys up perfect with the ring gear. Took about 20 minutes to install . I couldn't be happier. Itried a 6 voit starter and it engaged about 80 percent of the time,not good. This was the answer to my problem. Special thanks goes out to Charles for helping me with this problem mike

just me · Post by **just me** » Wed Jan 25, 2017 5:32 pm

What did it set you back?

RMS · Post by **RMS** » Wed Jan 25, 2017 5:47 pm

hi Mike welcome to the board

ya those 24v starters spin slow.

...other m37s ? lets see some picks!

cheers
Robyn

Post by **Cal_Gary** » Wed Jan 25, 2017 10:36 pm

Good to know Mike! I'm considering one myself once I get my tranny fixed.
Gary

Post by **T. Highway** » Thu Jan 26, 2017 7:15 am

Here is the thread in case you missed it. http://www.g741.org/PHPBB/viewtopic.php?f=3&t=8211

Bert

52nblue · Post by **52nblue** » Sat Jan 28, 2017 4:13 pm

This is a picture of my 3 m37

Post by **T. Highway** » Mon Jan 30, 2017 4:20 am

Nice line up of M37s

Bert

just me · Post by **just me** » Mon Jan 30, 2017 4:36 am

52nblue wrote:This is a picture of my 3 m37

I have the tin your missing for the one on the left. Cheap.

Tom P · Post by **Tom P** » Mon Jan 30, 2017 6:33 am

Nice looking Trucks!
Welcome
Tom

52nblue · Post by **52nblue** » Mon Jan 30, 2017 9:16 am

Thank you for your complements. I tried to post a bigger picture but it would not let me download. I bought the truck on left and it was 100 percent complete ,it had 2 stuck valves and a broken head bolt, but the guy had a herniated disc in his back and could no longer work on it. I bought it took troop seats ,jump seat, spare tire bracket, bow corners, pioneer rack and completed truck on right. I unstuck the valves, fixed gas tank, and put finders back on and hauled my wood for 2 years (5 cord a year) .I took it down to get the mail one day and I guy was going by , he stopped asked all kinds of questions ,I think he fell in love with it ,asked if it was for sale I thought to myself who needs 3 m37 so I sold it to him. It worked out good because at the time is was looking at a unmolested m38 (hard to find) so I sold the 37 and replaced it with a willys m38

Post by **T. Highway** » Tue Jan 31, 2017 12:32 pm

OK, now we need to see the M38 picture.

Bert

52PLOWERWAGON · Post by **52PLOWERWAGON** » Tue Jan 31, 2017 1:06 pm

52nblue wrote:... I thought to myself who needs 3 m37 ...

I do ... but I only have 1

reduction starter

reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter

Re: reduction starter