Brake Bleeder Adapter

pwrwagonfire · Post by **pwrwagonfire** » Fri Sep 11, 2015 2:26 pm

Gentlemen,

I just picked up a nice older model pressure bleeder at a yard sale. I'd like to use it on my M-37...
Does anybody know where I can get the correct MC adapter?
Is there a part number I can order?

-T

ZGjethro · Post by **ZGjethro** » Fri Sep 11, 2015 3:53 pm

I have a newer replacement master cylinder on my truck, and I think the top was vented. I screwed an adaptor into that vent fitting hole and used my Motive power bleeder. It worked really well. I have about 5' of tubing on the fittings so I can have the power bleeder in the cab and have it reach the footboard location of the master cylinder

Post by **Cal_Gary** » Fri Sep 11, 2015 9:50 pm

Ditto-I fabbed up a fitting to an old MC plug:
Gary

pwrwagonfire · Post by **pwrwagonfire** » Sun Sep 13, 2015 4:32 pm

Thanks for the replies guys!
I was hoping that there might be an adapter with the same pipe thread somebody stumbled across.

I will see what I can rig up along the lines of the photograph below.

-T

rickv100 · Post by **rickv100** » Tue Sep 22, 2015 4:34 pm

i have fabricated an adapter using a pipe thread adapter. I think it is 3/4" with a 1/4" hole then a 1/4" hose barb.

Rick

pwrwagonfire · Post by **pwrwagonfire** » Wed Sep 23, 2015 3:53 am

rickv100 wrote:i have fabricated an adapter using a pipe thread adapter. I think it is 3/4" with a 1/4" hole then a 1/4" hose barb.

Rick

Exactly what I needed! Thanks!

-T

Brake Bleeder Adapter

Brake Bleeder Adapter

Re: Brake Bleeder Adapter

Re: Brake Bleeder Adapter

Re: Brake Bleeder Adapter

Re: Brake Bleeder Adapter

Re: Brake Bleeder Adapter