Muffler pipe support brackets

Chris P · Post by **Chris P** » Mon May 19, 2014 2:25 pm

Have people had luck with old NOS muffler pipe supports, or does the flexible part break too easily from age?

thanks

RMS · Post by **RMS** » Mon May 19, 2014 7:35 pm

rivets can be drilled and the rubber can always get changed out for a bit of side wall.

Post by **Cal_Gary** » Mon May 19, 2014 9:06 pm

Just need to check them regularly, as once they break, if you're not paying attention, the exhaust manifold will crack from the stress/weight of the exhaust. That's why the manifolds command high prices....
Gary

refit1701 · Post by **refit1701** » Tue May 20, 2014 6:13 pm

My NOS mounts were in great shape. You just have to inspect, as the others said. But that goes for everything on these trucks.

Chris P · Post by **Chris P** » Wed May 21, 2014 4:38 pm

Thanks for the replies!

pwrwagonfire · Post by **pwrwagonfire** » Thu May 22, 2014 9:10 am

Cal_Gary wrote:Just need to check them regularly, as once they break, if you're not paying attention, the exhaust manifold will crack from the stress/weight of the exhaust. That's why the manifolds command high prices....
Gary

Good info, never thought of this! Previous owner replaced them with generic mounts...

-T

Muffler pipe support brackets

Muffler pipe support brackets

Re: Muffler pipe support brackets

Re: Muffler pipe support brackets

Re: Muffler pipe support brackets

Re: Muffler pipe support brackets

Re: Muffler pipe support brackets