DANG! Dropped the windsheild nut bar and need another!

choppa · Post by **choppa** » Fri Apr 25, 2014 8:25 am

While helping me disasembly the cab/dash parts, my G-friend dropped the nut bar that goes up under the dash to support the windsheild hold down bracket.

Fell and got lodged between the sheet metal kick panel and outer cab wall!

Tried unsuccessfully to reach it with a magnet... and a coat hanger.

anyone have another for sale?

DAP · Post by **DAP** » Fri Apr 25, 2014 8:53 am

I have one but I am south of Charlotte, NC so shipping might be high. Where are you?

m-11 · Post by **m-11** » Fri Apr 25, 2014 10:53 am

I might have one but like DAP stated you need to give your location. Also a picture of what you need would help.

choppa · Post by **choppa** » Mon Apr 28, 2014 6:50 am

shoot. Was just at the remote cabin and didnt think of taking a picture.

It doesnt weight much, into only like 4 inches long or so.. 1/4" thick x like 3/4" wide with two (2) threaded tapped holes to accpt the two bolts.. its just the simple flat stock , drilled and tapped nut bar.

probably weight about 1/4 pound?

Either of you have one?

if you got pics I can identify it to, please send to:

wc57doggieboy@yahoo.com

m-11 · Post by **m-11** » Sat May 10, 2014 8:31 am

How did that part workout?

DANG! Dropped the windsheild nut bar and need another!

DANG! Dropped the windsheild nut bar and need another!

Re: DANG! Dropped the windsheild nut bar and need another!

Re: DANG! Dropped the windsheild nut bar and need another!

Re: DANG! Dropped the windsheild nut bar and need another!

Re: DANG! Dropped the windsheild nut bar and need another!