Front Fender Patch Panel

[Tom P]

Posting for a friend of mine who's looking for the front fender patch panel under the headlamp and front support area.
Anyone know of a source? Or we making our own?
I know Sheldon has passed(RIP) so I have no idea anymore.
Thanks for any help you can offer.
TGP

[majorhitt]

I know Steve took over for his dad.I don't have contact no. With that I don't know what the new name is either. Boy I'm just loaded with all kinds of info, too bad it's not helpful. I'll do a little digging and see what I could find.

[majorhitt]

http://www.greenspanelworks.com/ Give this a try

[refit1701]

I thought Vintage Power Wagons had the patch panel. Maybe Midwest Military too.

[majorhitt]

or this one.Stephen@GreenesPanelWorks. com. I didn't try any hope they work.

[Tom P]

Thanks Those links no longer work.
I have searched for him also.
Did tell him to try Vintage and John.
Have not heard back yet.
I will update any info I find when I get it.
Thanks!!
TGP

[002]

Thanks for your post Tom. Checked with Mseriesrebuild as well. No Luck. I'll be watching. VPW no, double checking with Mid West. I think I sent an e-mail couple of weeks back, and answer was no. But just to make sure I'll resend.

[002]

Mid West Military replied (On a Sunday no less) to my e-mail. No Luck. The search continues. 002

[monkeymissile]

sounds like a business opportunity for someone.....if someone had one I'd consider reverse-engineering it and make some tooling for them.

[Gerry]

If you cant find one I have a repair panel that I was going to use to repair my spare fender so I could sell it. Shoot me a pm if you get desperate.

[xm708]

Well if nobody is making them maybe we could get our hands on the old dies ? I am surprised John at Midwest isn't tooling up or are you John ? Any ideas if Steven sold the business I did web research and it says after his dad he renamed it and moved and then somewhere in 2012 he also closed up shop. I wonder if anybody knows where his son went ? I would be interested in making them if I could get the dies Sheldon used because I am sure they aren't cheap to make ? anybody on here ever make sheet metal dies ??

[tbone1004]

got in touch with Stephen since he lives relatively close to me. He said a guy by the name of John Green in Vermont purchased all of the dies and tooling from them, but said he didn't think he did anything with it. I haven't called him, but if any of you guys are interested his number is 802-464-3306. I'd normally not post it, but it's the number associated with his business. Greene's Service Center in Wilmington VT

[xm708]

Just called and left a message with the new owner of the dies I will post the outcome so we don't swamp him with phone calls.

Tbone thanks for the info....

[monkeymissile]

I have the name of a shop that could use the dies if this gentleman is not interested......

[xm708]

well left message and waited 2 days I will try again tomorrow but it sounds as though somebody does not want to talk about the dies...