M101A1 front drop leg question.

HingsingM37 · Post by **HingsingM37** » Sun Feb 26, 2012 5:56 am

Has anybody removed the spring loaded plunger pin for the front drop leg on their M101? I removed the roll pin hoping the lock pin & spring would come out, not so. Is the pin and handle pressed together? Do I need to heat the handle, straighten it, and remove it that way?

Carter · Post by **Carter** » Sun Feb 26, 2012 6:56 am

Yes, the spring loaded plunger pin must be bent to be removed. My M101 had no pin when I bought it so I turned one to shape then bent it after installation.

HingsingM37 · Post by **HingsingM37** » Sun Feb 26, 2012 9:03 am

Thanks Carter, had I taken the time to look at my book more closely I would have saw that picture&note..

Carter · Post by **Carter** » Sun Feb 26, 2012 9:57 am

You are welcome

M101A1 front drop leg question.

M101A1 front drop leg question.

Re: M101A1 front drop leg question.

Re: M101A1 front drop leg question.

Re: M101A1 front drop leg question.