DODGE M37 LIGHTING

nutsfor59 · Post by **nutsfor59** » Fri May 06, 2011 11:48 am

hi,does anyone know if these systems are capable of running a halogen bulb ?? does anyone even make them ?? and does anyons still make or have the yello headlight bulbs ??? thanks

m-37Bruce · Post by **m-37Bruce** » Fri May 06, 2011 12:54 pm

I think Cabell is running halogen lamps, have you checked his page yet?

nutsfor59 · Post by **nutsfor59** » Fri May 06, 2011 1:39 pm

hi,no i have not,i'll try to find it,thanks

M37UK · Post by **M37UK** » Fri May 06, 2011 1:48 pm

nutsfor59 wrote:hi,no i have not,i'll try to find it,thanks

Here you go:

http://www.garbee.net/~cabell/headlights.htm

Hope this helps.

Cheers

cuz · Post by **cuz** » Fri May 06, 2011 7:18 pm

Just canvas your MV vendors. Several sell the amber 24 volt lamps.

monkeymissile · Post by **monkeymissile** » Sat May 07, 2011 3:20 am

FYI, halogen lamps are just incandescent with a gas inside the bulb, they do not have any special requirements. The electrical system doesn't care, watts are watts. It's just a matter of finding the right lamps.....

Rich · Post by **Rich** » Wed May 11, 2011 4:24 pm

Nutsfor59,
I am using PIAA headlight housings on my 1952 M-37, it has a single wire 24 volt altenator. I used 12v bulbs in them about 25 years ago. I purchased 24v NATO bulbs and installed them They are working fine.
The bulbs are three prong. I bought a three prong headlight connector and spliced in the Douglas connectors.
Rich Szklany

DODGE M37 LIGHTING

DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING

Re: DODGE M37 LIGHTING