Home M37 Brakes
Moderators: Cal_Gary, T. Highway, Monkey Man, robi
Re: M37 Brakes
And I am done listening to your lip lashings and inuendos as well. I said nothing above about your business. It seems you must be very insecure and have a tendency to read something into my posts that only you can see. Then I have to sit here and get a lip bashing about something you think I inferred. I would appreciate a little bit of moderation from the moderators here.
Wes K
wsknettl@centurytel.net
54 M37, 66 M101, 45MB, 51 M38, 60 CJ5, 46 T3-C
MVPA 22099
Disclaimer: Any data posted is for general info only and may not be M37 specific or meet with the approval of some esteemed gurus.
wsknettl@centurytel.net
54 M37, 66 M101, 45MB, 51 M38, 60 CJ5, 46 T3-C
MVPA 22099
Disclaimer: Any data posted is for general info only and may not be M37 specific or meet with the approval of some esteemed gurus.
-
MSeriesRebuild
- 1SG
- Posts: 2832
- Joined: Sat Oct 20, 2007 4:35 am
- Location: Norwood, NC
- Contact:
Re: M37 Brakes
Fine if you are not inferring anything, we've discussed this in private mail before and I had hoped we had a little clearer understanding on the subject, but the same stuff keeps happening. In light of that, it should be no surprise to you that you get the type of response that you do. You spoke your opinion, I replied with mine, nothing more. Personally I see no need for the moderator wasting his time as nothing outside normal conversation has taken place.cuz wrote:And I am done listening to your lip lashings and inuendos as well. I said nothing above about your business. It seems you must be very insecure and have a tendency to read something into my posts that only you can see. Then I have to sit here and get a lip bashing about something you think I inferred. I would appreciate a little bit of moderation from the moderators here.
Charles Talbert
www.mseriesrebuild.com
www.mseriesrebuild.com
Re: M37 Brakes
Charles has gone the extra mile to help me out on this continueing problem. He has literaly taken time away from his business day to talk me through things. I don't know about anyone else but I really appreciate someone who takes time to help out a total stranger.
This is a business for him. For most of us here it is a hobby. Opinions are just what they are. We all have them. We just have to sort them out, but lets not fight with one another. My original post was not meant for that.
My problem has balloned out from my original post. I seam to have a right front wheel that locks up when I put the brake drum back on and tighten up the 3 flathead machine screws. I am going to take it all apart and see if the hub has any run out on the flange.
This is a business for him. For most of us here it is a hobby. Opinions are just what they are. We all have them. We just have to sort them out, but lets not fight with one another. My original post was not meant for that.
My problem has balloned out from my original post. I seam to have a right front wheel that locks up when I put the brake drum back on and tighten up the 3 flathead machine screws. I am going to take it all apart and see if the hub has any run out on the flange.