oil lines to the filter? what are they called?

m37_power · Post by **m37_power** » Mon Dec 07, 2009 6:21 am

I need to replace the lines that go to my oil filter. Does anyone know what they are called or a part number? I need to get some stuff ordered to finish up my engine. Any help is greatly appreciated.

Carter · Post by **Carter** » Mon Dec 07, 2009 6:37 am

Midwest Military lists them as: Oil Filter Hoses - CC 1188079 $14.00

http://www.midwestmil.com/m37p9.html

m37_power · Post by **m37_power** » Mon Dec 07, 2009 6:41 am

I thought thats what they were called, but i wanted to make sure. Thanks for your help Carter.

Carter · Post by **Carter** » Mon Dec 07, 2009 7:06 am

You are welcome. When I replaced them I bought a length of hose and some brass fittings, all available locally, and made up my own. Took the old hoses and matched everything at the local NAPA.

MSeriesRebuild · Post by **MSeriesRebuild** » Mon Dec 07, 2009 3:16 pm

New exact replacement hoses are available at NAPA, listed in the EATON line catalog. I have the # at the shop that I could post tomorrow if you like.

refit1701 · Post by **refit1701** » Mon Dec 07, 2009 4:20 pm

I'd like those numbers posted, Charles! I was about to ask for that.

MSeriesRebuild · Post by **MSeriesRebuild** » Mon Dec 07, 2009 4:35 pm

refit1701 wrote:I'd like those numbers posted, Charles! I was about to ask for that.

I'll make myself a note.

MSeriesRebuild · Post by **MSeriesRebuild** » Tue Dec 08, 2009 9:18 am

The oil filter feed and return line hoses are EATON #11224, two are required.

While I was at it, I checked the # for the flex hose for the intake line at the fuel pump. It is EATON #11078, one required.

These are premium quality hoses, exactly like the originals.

refit1701 · Post by **refit1701** » Tue Dec 08, 2009 2:23 pm

Thanks Charles!

m37_power · Post by **m37_power** » Tue Dec 08, 2009 4:03 pm

wow thats awesome...i love part numbers. thanks guys!

Post by **T. Highway** » Wed Dec 09, 2009 5:13 am

Thats great info Charles. I learn something new every day on this site.

Captnsim · Post by **Captnsim** » Wed Dec 09, 2009 7:21 am

Thanks for taking the time to share those part #'s Charles!