Keep in mind your windshield frames are the same as what is on the M35 2.5 ton, M54 5-ton, and 800-series 5-ton.
Might be easier to find over there.
Just not the 900 series 5-ton.
Dennis
Search found 493 matches
- Sun Jan 28, 2024 7:02 am
- Forum: Builders Blog
- Topic: My 1952 Dodge M37 re-building process
- Replies: 83
- Views: 203470
- Thu Jan 25, 2024 5:50 am
- Forum: General M37
- Topic: Stiff Steering
- Replies: 11
- Views: 1394
Re: Stiff Steering
In a word, no.
Park it and have someone rotate the wheel whilst you look for 'slop' in any linkage or tie rod end.
Something is either looking for lube or replacement.
The M37 in stock form is easy enuf to steer.
PoW
Park it and have someone rotate the wheel whilst you look for 'slop' in any linkage or tie rod end.
Something is either looking for lube or replacement.
The M37 in stock form is easy enuf to steer.
PoW
- Tue Jan 09, 2024 7:06 pm
- Forum: Technical group
- Topic: How to get spark plugs wires black again
- Replies: 2
- Views: 1194
Re: How to get spark plugs wires black again
Plasti-Dip.
PoW
PoW
- Mon Jan 08, 2024 6:06 pm
- Forum: Technical group
- Topic: Front Axle Pinion Bearing
- Replies: 14
- Views: 5811
Re: Front Axle Pinion Bearing
That is a pinion seal for the M37, not the bearing set.
The drop-in (complete 3rd member) is purely Chrysler Corp, not Spicer, Dana, or anybody elses design.
PoW
The drop-in (complete 3rd member) is purely Chrysler Corp, not Spicer, Dana, or anybody elses design.
PoW
- Sun Jan 07, 2024 1:13 pm
- Forum: General M37
- Topic: How about a picture of YOUR M37 OR M43!!
- Replies: 76
- Views: 16130
Re: How about a picture of YOUR M37 OR M43!!
No, they have a bit of a pattern pressed into them.
D
D
- Sat Jan 06, 2024 11:20 am
- Forum: General M37
- Topic: How about a picture of YOUR M37 OR M43!!
- Replies: 76
- Views: 16130
Re: How about a picture of YOUR M37 OR M43!!
I need the areas just in front of the seats that lie flat.
Dennis
Dennis
- Fri Jan 05, 2024 8:38 pm
- Forum: General M37
- Topic: How about a picture of YOUR M37 OR M43!!
- Replies: 76
- Views: 16130
Re: How about a picture of YOUR M37 OR M43!!
What did you do with what you took out? I have a pretty nice cab with a rusted thru floor.
PoW
PoW
- Tue Jan 02, 2024 8:48 pm
- Forum: General M37
- Topic: How about a picture of YOUR M37 OR M43!!
- Replies: 76
- Views: 16130
Re: How about a picture of YOUR M37 OR M43!!
Sure would be nice if the mod could increase the size limit on images.
So many details are lost.
PoW
So many details are lost.
PoW
- Thu Dec 21, 2023 3:41 pm
- Forum: General M37
- Topic: Rebuilt axles 13 Times !!!!
- Replies: 7
- Views: 2847
Re: Rebuilt axles 13 Times !!!!
BTW, the front axle never needed any service in all those miles,
I did blow up 2 Warn M13 hubs over the years when really working it in 4WD.
PoW
I did blow up 2 Warn M13 hubs over the years when really working it in 4WD.
PoW
- Tue Dec 19, 2023 5:46 pm
- Forum: General M37
- Topic: Rebuilt axles 13 Times !!!!
- Replies: 7
- Views: 2847
Re: Rebuilt axles 13 Times !!!!
A few U-joints, not many. They just got a bit sloppy, no catastrophic failures. Rebuilt the generator with new bearings & brushes. Lots of tires, several brake jobs. 3 sets of seat covers, 3 repaints. The radiator developed a leak, resoldered to be OK. Some seals on the transfer. A new clutch &a...
- Sun Dec 10, 2023 9:30 pm
- Forum: General M37
- Topic: Rebuilt axles 13 Times !!!!
- Replies: 7
- Views: 2847
Re: Rebuilt axles 13 Times !!!!
That would be me. Back around '73 or so, I finished up a restoration of my M37, and did a Diesel repower. Yes, 13 sets of ring/pinion gears, none of which were aftermarket. The majority were complete NOS drop-ins when they were available. Never broke anything, other than a few axle shafts in really ...
- Tue Dec 05, 2023 5:59 am
- Forum: Technical group
- Topic: Front Axle Pinion Bearing
- Replies: 14
- Views: 5811
Re: Front Axle Pinion Bearing
Gillispie 36173 from Rapco in Texas
- Sun Dec 03, 2023 7:40 am
- Forum: Technical group
- Topic: Front Axle Pinion Bearing
- Replies: 14
- Views: 5811
Re: Front Axle Pinion Bearing
Yep the differential has to come out. No biggie, mark the placement first of the ends before removing the caps. Easy to do that. The pinion preload is very tedious to set, as you have to pull it several times to set each bearing set individually. If you don't have the TM's, go to steelsoldiers.com w...
- Tue Nov 21, 2023 5:50 am
- Forum: General M37
- Topic: New Speedometer Question
- Replies: 6
- Views: 4405
- Sat Nov 18, 2023 7:05 am
- Forum: General M37
- Topic: Does the M37 share the same pioneer tools with the WC's...?
- Replies: 13
- Views: 6915
Re: Does the M37 share the same pioneer tools with the WC's...?
Yep. The right tools are harder to find, and not at your usual hardware store.