Nope Still havent found Waldo,but I will study the picture somemore.

hb

HB, I wasn't saying you said anything wrong, just adding my 2 cent. I still have not re-assembled my bed, just about finished w/ some fuel delivery issues. :roll: Bruce When I read what you wrote i realized that my nomenclature wash not quiet correct and I wanted to clean up my mess no offense take...

Bob I need to clarify my terminology.what I called the bed is actually a box assembly and I apologize for that. Bruce is correct in the fact the original bed/floor of the box was a two piece welded bolt in part. I just sold a bed/floor reproduction that I bought from Vintage Power Wagon and it was a...

Bob The M37 bed is a bolt together unit and if the bolts aren't rusty it is a fairly simple job, and it makes replacement of parts quick and easy verses being welded together, it's sort of a erector set.That being said there is the problem of the bed shifting and bolt holes sometimes are more diffic...

Bob As you have noticed there have been several way's mentioned to gain the final results and there really is no right or wrong way and what works for you and the tools you have is a way to get it done, but the key that has already been said is Patience and practice.They will be your best friend so ...

Vinny what can be done as far as repairing the manifolds is by relieving the cracks by grinding the area to accept a weld,then bolt it up to a old engine block or make fixture for holding the manifold in place. once it is secured then the manifold will need to be heated to a cherry red color at the ...

I have a aluminum four barrel intake for that if your interested! it would take a few pounds off and look good with performance.

hb

Good looking job!, I just want to warn you about installing the turbo on a 6.2 engine as the 6.5 has lower compression. In 1996 I worked at a Chevy dealer and we had a customer that installed a new 6.2 and a turbo from the newer at that time 6.5 that engine and two more only ran for just over 100 mi...

Check the fan belt tenssion it may be slipping under load.

hb

Phillip I have in the past made those things happen but the states are all changing there policies. I would go down to the local DMV and ask what would be needed,they may have you apply for a abandoned title,but Tennessee might have different laws so it will be hard to say. I would not get into the ...

Finding a quality vise for a reasonable price is all in being at the right place at the right time. I was lucky enough to dismantle a old car dealership years back and ended up with a couple of older Wilton 6" vises and several others that have no names but nice to have around,I also have found...

You might try and loosen all of the bolts that are holding the grill together then with a jack raise the left front corner and re tighten the bolts. There is enough clearance in the bolt holes that you might gain a little this way! After that paint it drive it and forget about it.Driving down the ro...

Fiberglass hard top for M37, This top was taken off to replace with canvas top. it has no rear window but is fine shape.
call 623-694-0231or PM with your email address for pictures.

hb

I totally agreed with Cuz's statement about contacting the vendor as you have done, Now that you have given them this chance to make things right there would be other questions to ask while the engine is there,was the transfer tube even checked? was the rest of the machine work properly done?. Clear...

I was just at the recent Barrett Jackson auction and there was a collection of bomb fins made into a table,barbecue and a stand up cooler . they were all about four foot in length and really looked good and would be great patio furniture.

hb