Search found 1198 matches
- Wed Feb 28, 2024 1:57 pm
- Forum: General M37
- Topic: Oil Bath Air Cleaner Gasket
- Replies: 9
- Views: 950
Re: Oil Bath Air Cleaner Gasket
There needs to be a gasket under the intake extension tube to the intake elbow and one on the upper side of the flange to seal the fording shroud. (If you have the fording kit.)
- Mon Feb 26, 2024 12:59 pm
- Forum: General M37
- Topic: Oil Bath Air Cleaner Gasket
- Replies: 9
- Views: 950
Re: Oil Bath Air Cleaner Gasket
Medium thickness paper gasket. Mine was Garlok but you can't get the material anymore.
- Sun Feb 25, 2024 10:59 am
- Forum: General M37
- Topic: GLAD TO SEE SOME PROJECTS PROGRESSING!
- Replies: 5
- Views: 801
Re: GLAD TO SEE SOME PROJECTS PROGRESSING!
I just drive mine. I years ago abandoned any thoughts of restoration.
- Sun Jan 28, 2024 5:05 pm
- Forum: Technical group
- Topic: Oil pump prime?
- Replies: 4
- Views: 1128
Re: Oil pump prime?
I made an oil system pressure charger for new engine startup. An old refrigerant container. Filled with the oil charge and pressurized with air. Connect to the oil gallery and fill the engine by running the oil through all the passages and let it drain to the pan. Then crank it up.
- Thu Jan 25, 2024 4:55 pm
- Forum: General M37
- Topic: Stiff Steering
- Replies: 11
- Views: 1313
Re: Stiff Steering
And I always thought removing the steering wheel was the hard part! You could try offset box wrenches.
(I had the powertrain out when I did mine.)
(I had the powertrain out when I did mine.)
- Sun Dec 31, 2023 3:47 pm
- Forum: Soap box
- Topic: 23/24 interface
- Replies: 2
- Views: 1151
23/24 interface
Well, another year has passed with constant driving, moderate maintenance and no restoration. I like this hobby! 2024 will probably end up being the year of the drivetrain replacement. Everything is built and ready for installation from radiator to rear axle assembly. Just gotta do it! Y'all have a ...
- Thu Dec 28, 2023 5:26 am
- Forum: Technical group
- Topic: Oil Pressure Sender Plumbing
- Replies: 5
- Views: 1742
Re: Oil Pressure Sender Plumbing
I love to be the one to say this. There are good pictures in the manuals. They may not be in the section you would think, but they will be there. (Nearly every weird detail is in them, you just have to spend time and go through them.)
- Mon Dec 25, 2023 5:32 pm
- Forum: General M37
- Topic: M37 wrecker
- Replies: 1
- Views: 1073
M37 wrecker
This came across my YouTube feed today. Cool truck. Wrecker and fiberglass cab.
https://m.youtube.com/watch?v=QqMad6CFCY8
https://m.youtube.com/watch?v=QqMad6CFCY8
- Wed Dec 20, 2023 1:45 pm
- Forum: Technical group
- Topic: Rope tie down on canvas top
- Replies: 5
- Views: 2237
Re: Rope tie down on canvas top
A little more secure method.
- Sat Dec 16, 2023 5:19 am
- Forum: Technical group
- Topic: New Winch Worm GEAR
- Replies: 2
- Views: 2922
Re: New Winch Worm GEAR
And use the correct lubricant for worm gear boxes that also doesn't attack yellow metals.
- Sun Dec 10, 2023 8:22 am
- Forum: General M37
- Topic: Rebuilt axles 13 Times !!!!
- Replies: 7
- Views: 2776
Re: Rebuilt axles 13 Times !!!!
Axles might not be up to the task. 3rd member is plenty tough. Unless driving style is, well, not good.
- Sun Dec 10, 2023 8:18 am
- Forum: Swap Meet
- Topic: NEEDED: Winch worm Gear ?
- Replies: 3
- Views: 2747
Re: NEEDED: Winch worm Gear ?
They've always been expensive. About $800 USD each worm and pinion. MU is heavier duty than the stock LU winch. Finding a used winch with good gears is always the best bet
- Sun Nov 12, 2023 11:27 am
- Forum: Technical group
- Topic: Normal oil consumption?
- Replies: 7
- Views: 5190
Re: Normal oil consumption?
Today, my consumption went from acceptable to not. 1QT in 40 miles. First time in ages I was able to run continuously for miles at 40 mph. Puked out the filler tube all over the engine compartment. Blow by has gotten too excessive. The PCV can't even come close to keeping up. I'll finally have to ge...
- Sat Nov 11, 2023 2:14 pm
- Forum: Technical group
- Topic: Front Axle Pinion Bearing
- Replies: 14
- Views: 5731
Re: Front Axle Pinion Bearing
I don't have my manuals here but I thought there were 3 bearings in the pinion. Pretty sure DC Truck Parts will have your bearings.
- Wed Nov 01, 2023 5:15 am
- Forum: General M37
- Topic: Replacement Fuel Tank
- Replies: 9
- Views: 5072
Re: Replacement Fuel Tank
E350 van tank is also a viable solution. Nice job on your install.